Известие

Collapse
No announcement yet.

Технически характеристики на моделите 86-04

Collapse
X
 
  • Filter
  • време
  • Show
Clear All
new posts

  • Технически характеристики на моделите 86-04

    Технически характеристики на по-разпространените модели на марката Alfa Romeo от 1986 до 2004.
    За моделите от периода 1986-1988

    Alfa Romeo 75 1.6 1986
    Dimensions
    Wheelbase: 2510 mm
    Track front: 1368 mm
    Track rear: 1358 mm
    Length: 4331 mm
    Width: 1631 mm
    Ground clearance: 122 mm
    Kerb weight: 1090 kg
    Fuel capacity: 49 l
    Aerodynamics
    Drag coefficient: 0.34
    Engine
    Manufacturer: Alfa Romeo
    Type: S-4
    DOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 78.00mm Ч 82.00mm
    Bore / stroke ratio: 0.95
    Displacement: 1570 cc 95.80 cu in
    Compression: 9.00:1
    Fuel system: 2 We carbs
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 109.5 PS (108.0 bhp) (80.5 kW)@5800 rpm
    Max. torque: 146.0 Nm (108 lbft) (14.9 kgm)@4000 rpm
    Coolant: Water
    Specific output: 68.8 bhp/litre
    Specific torque: 92.99 Nm/litre
    Performance
    0-100km/h: 10.7 s
    Kilometre: 32.50s
    Top speed: 180 km/h
    Fuel consumption: 6.9/9.4/11.8 l/100km 90km/h / 120km/h / urban
    Power to weight: 99.08 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion
    Turning circle: 10.90 m
    Suspension front: I.DW.TB.ARB.
    Suspension rear: dD.WL.CS.ARB.
    Tyres front: 185/70 TR 13
    Tyres rear: 185/70 TR 13
    Brakes: Di/Di-S
    Brake diametre: 250/250 mm
    Transmission: 5M
    Drive: RWD
    Top gear ratio: 0.78
    Final drive ratio: 4.56


    Alfa Romeo 75 1.8 1986
    Dimensions
    Wheelbase: 2510 mm
    Track front: 1367 mm
    Track rear: 1356 mm
    Length: 4331 mm
    Width: 1631 mm
    Ground clearance: 120 mm
    Kerb weight: 1060 kg
    Fuel capacity: 49 l
    Aerodynamics
    Drag coefficient: 0.34
    Frontal area: 1.91
    Cx: 0.65
    Engine
    Manufacturer: Alfa Romeo
    Type: S-4
    DOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 80.00mm Ч 88.50mm
    Bore / stroke ratio: 0.9
    Displacement: 1779 cc 108.56 cu in
    Compression: 9.50:1
    Fuel system: 2 We carbs
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 119.6 PS (118.0 bhp) (88 kW)@5300 rpm
    Max. torque: 167.0 Nm (123 lbft) (17 kgm)@4000 rpm
    Coolant: Water
    Specific output: 66.3 bhp/litre
    Specific torque: 93.87 Nm/litre
    Performance
    0-100km/h: 9.5 s
    Kilometre: 30.00s
    Top speed: 193 km/h
    Fuel consumption: 6.9/8.9/10.5 l/100km 90km/h / 120km/h / urban
    Power to weight: 111.32 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion
    Turning circle: 10.90 m
    Suspension front: I.DW.TB.ARB.
    Suspension rear: dD.WL.CS.ARB.
    Tyres front: 185/70 HR 13
    Tyres rear: 185/70 HR 13
    Brakes: VeDi/Di
    Brake diametre: 250/250 mm
    Transmission: 5M
    Drive: RWD
    Top gear ratio: 0.78
    Final drive ratio: 4.3


    Alfa Romeo 164 2.0 TS 1987
    Dimensions
    Wheelbase: 2660 mm
    Length: 4648 mm
    Width: 1753 mm
    Kerb weight: 1200 kg
    Fuel capacity: 70 l
    Aerodynamics
    Drag coefficient: 0.3 Engine
    Manufacturer: Alfa Romeo
    Type: S-4
    DOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 84.00mm Ч 88.50mm
    Bore / stroke ratio: 0.95
    Displacement: 1962 cc 119.72 cu in
    Compression: 10.10:1
    Aspiration: Normal
    Max. output: 150.1 PS (148.0 bhp) (110.4 kW)@5800 rpm
    Max. torque: 186.0 Nm (137 lbft) (19 kgm)@4000 rpm
    Coolant: Water
    Specific output: 75.4 bhp/litre
    Specific torque: 94.8 Nm/litre
    Performance
    0-60mph: 9.5 s
    Quarter mile: 17.70s
    Top speed: 203 km/h
    Power to weight: 123.33 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Transverse
    Transmission: 5M
    Drive: FWD


    Alfa Romeo 164 2.0 Turbo 1987
    Dimensions
    Wheelbase: 2660 mm 104.72 in
    Track front: 1515 mm 59.64 in
    Track rear: 1490 mm 58.66 in
    Length: 4648 mm 182.99 in
    Width: 1753 mm 69.01 in
    Ground clearance: 140 mm 5.51 in
    Kerb weight: 1250 kg 2755.77 lb
    Fuel capacity: 70 l 18.49 US gal
    Aerodynamics
    Drag coefficient: 0.3
    Engine
    Manufacturer: Fiat
    Type: S-4
    DOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 84.00mm Ч 90.00mm
    Bore / stroke ratio: 0.93
    Displacement: 1995 cc 121.74 cu in
    Compression: 8.00:1
    Fuel system: Bo LE2-Jetronic fuel injection
    Aspiration: Turbo
    Compressor type: 1 Garrett T3/50 turbocharger
    Intercooler: Y
    Catalytic Converter: N
    Max. output: 177.4 PS (175.0 bhp) (130.5 kW)@5250 rpm
    Max. torque: 265.0 Nm (195 lbft) (27 kgm)@2500 rpm
    Coolant: Water
    Specific output: 87.7 bhp/litre
    Specific torque: 132.83 Nm/litre
    Performance
    0-100km/h: 7.2 s
    Kilometre: 28.20s
    Top speed: 220 km/h
    Power to weight: 140 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Transverse
    Steering: rack & pinion PAS
    Turning circle: 10.80 m
    Suspension front: I.MS.ARB.
    Suspension rear: I.DW.ARB.CS.
    Brakes: VeDi/Di-S
    Transmission: 5M
    Drive: FWD
    Top gear ratio: 0.93
    Final drive ratio: 3.1

    Alfa Romeo 164 3.0 V6 1987
    Dimensions
    Wheelbase: 2660 mm
    Track front: 1514 mm
    Track rear: 1486 mm
    Length: 4648 mm
    Width: 1753 mm
    Kerb weight: 1365 kg
    Fuel capacity: 70 l
    Aerodynamics
    Drag coefficient: 0.3
    Engine
    Manufacturer: Alfa Romeo
    Type: V-6
    in 60° vee
    SOHC
    12 valves total
    2 valves per cylinder
    Main bearings: 4
    Bore x stroke: 93.00mm Ч 72.60mm
    Bore / stroke ratio: 1.28
    Displacement: 2959 cc 180.56 cu in
    Compression: 9.50:1
    Fuel system: Bo Mot fuel inj.
    Aspiration: Normal
    Max. output: 194.7 PS (192.0 bhp) (143.2 kW)@5800 rpm
    Max. torque: 245.0 Nm (181 lbft) (25 kgm)@3000 rpm
    Coolant: Water
    Specific output: 64.9 bhp/litre
    Specific torque: 82.8 Nm/litre
    Performance
    0-60mph: 7.5 s
    0-100km/h: 7.7 s
    Quarter mile: 16.20s
    Top speed: 230 km/h
    Power to weight: 140.66 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Transverse
    Suspension front: I.MS.
    Suspension rear: I.MS.
    Transmission: 5M
    Drive: FWD

    Alfa Romeo 164 Turbo Diesel 1987
    Dimensions
    Wheelbase: 2660 mm
    Track front: 1515 mm
    Track rear: 1488 mm
    Length: 4555 mm
    Width: 1760 mm
    Kerb weight: 1490 kg
    Fuel capacity: 70 l
    Aerodynamics
    Drag coefficient: 0.3
    Engine
    Manufacturer: VM
    Type: S-4
    SOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 92.00mm Ч 94.00mm
    Bore / stroke ratio: 0.98
    Displacement: 2500 cc 152.55 cu in
    Compression: 22.00:1
    Fuel system: Diesel indirect injection
    Aspiration: Turbo D.
    Compressor type: 1 KKK turbocharger
    Intercooler: Air/air
    Catalytic Converter: N
    Max. output: 124.7 PS (123.0 bhp) (91.7 kW)@4200 rpm
    Max. torque: 294.0 Nm (217 lbft) (30 kgm)@2000 rpm
    Coolant: Water
    Specific output: 49.2 bhp/litre
    Specific torque: 117.6 Nm/litre
    Performance
    0-100km/h: 10.8 s
    Kilometre: 32.20s
    Top speed: 202 km/h
    Fuel consumption: 5.2/6.8/9.5 l/100km 90km/h / 120km/h / urban
    Power to weight: 82.55 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion PAS
    Turning circle: 10.80 m
    Suspension front: I.MS.ARB.
    Suspension rear: I.MS.CS.ARB.
    Wheels F/R: 6J x 15/6J x 15
    Tyres front: 195/65 R 15 91 V
    Tyres rear: 195/65 R 15 91 V
    Brakes: VeDi/Di-S-ABS
    Transmission: 5M
    Drive: FWD
    Top gear ratio: 0.72
    Final drive ratio: 3.41

    Alfa Romeo 33 Veloce 1987
    Dimensions
    Wheelbase: 2455 mm
    Track front: 1392 mm
    Track rear: 1359 mm
    Length: 4015 mm
    Width: 1612 mm
    Kerb weight: 910 kg
    Aerodynamics
    Drag coefficient: 0.36
    Engine
    Manufacturer: Alfa Romeo
    Type: F-4
    SOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 3
    Bore x stroke: 87.00mm Ч 72.00mm
    Bore / stroke ratio: 1.21
    Displacement: 1712 cc 104.47 cu in
    Compression: 9.50:1
    Fuel system: 2 We carbs
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 119.6 PS (118.0 bhp) (88 kW)@6000 rpm
    Max. torque: 148.0 Nm (109 lbft) (15.1 kgm)@3500 rpm
    Coolant: Water
    Specific output: 68.9 bhp/litre
    Specific torque: 86.45 Nm/litre
    Performance
    0-60mph: 9.1 s
    Quarter mile: 16.50s
    Top speed: 192 km/h
    Power to weight: 129.67 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Transmission: 5M
    Drive: FWD

    Alfa Romeo 33 Sportwagon 1987
    Dimensions
    Wheelbase: 2455 mm
    Track front: 1392 mm
    Track rear: 1359 mm
    Length: 4015 mm
    Width: 1612 mm
    Kerb weight: 977 kg
    Engine
    Manufacturer: Alfa Romeo
    Type: F-4
    SOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 3
    Bore x stroke: 87.00mm Ч 72.00mm
    Bore / stroke ratio: 1.21
    Displacement: 1712 cc 104.47 cu in
    Compression: 9.50:1
    Fuel system: 2 We carbs
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 119.6 PS (118.0 bhp) (88 kW)@6000 rpm
    Max. torque: 148.0 Nm (109 lbft) (15.1 kgm)@3500 rpm
    Coolant: Water
    Specific output: 68.9 bhp/litre
    Specific torque: 86.45 Nm/litre
    Performance
    0-60mph: 9.5 s
    Quarter mile: 17.50s
    Top speed: 190 km/h
    Power to weight: 120.78 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Suspension front: I.MS.
    Suspension rear: dD.WL.PR.CS.ARB.
    Transmission: 5M
    Drive: FWD


    Alfa Romeo 75 2.0 Turbo Diesel 1987
    Dimensions
    Wheelbase: 2510 mm
    Track front: 1368 mm
    Track rear: 1358 mm
    Length: 4331 mm
    Width: 1631 mm
    Ground clearance: 122 mm
    Kerb weight: 1220 kg
    Fuel capacity: 49 l
    Aerodynamics
    Drag coefficient: 0.34
    Engine
    Code: 80A
    Manufacturer: VM
    Type: S-4
    SOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 88.00mm Ч 82.00mm
    Bore / stroke ratio: 1.07
    Displacement: 1995 cc 121.74 cu in
    Compression: 22.00:1
    Fuel system: Bo VE4/10 F2150 L202 diesel inj.
    Aspiration: Turbo D.
    Compressor type: 1 KKK K16 turbo
    Intercooler: Air-Air
    Catalytic Converter: N
    Max. output: 95.3 PS (94.0 bhp) (70.1 kW)@4300 rpm
    Max. torque: 192.0 Nm (142 lbft) (19.6 kgm)@2300 rpm
    Coolant: Water
    Specific output: 47.1 bhp/litre
    Specific torque: 96.24 Nm/litre
    Performance
    0-100km/h: 12.4 s
    Quarter mile: @ 34.50 mph
    Kilometre: 34.50s
    Top speed: 175 km/h
    Fuel consumption: 5.5/7.9/9.0 l/100km 90km/h / 120km/h / urban
    Power to weight: 77.05 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion PAS
    Suspension front: I.DW.TB.ARB.
    Suspension rear: dD.WL.CS.ARB.
    Wheels F/R: 5.5J x 13/5.5J x 13
    Tyres front: 185/70 TR 13
    Tyres rear: 185/70 TR 13
    Brakes: Di/Di
    Brake diametre: 250/250 mm
    Transmission: 5M
    Drive: RWD
    Top gear ratio: 0.78
    Final drive ratio: 3.55

    Alfa Romeo 75 2.0 TS 1987
    Dimensions
    Wheelbase: 2510 mm 98.81 in
    Track front: 1367 mm 53.81 in
    Track rear: 1356 mm 53.38 in
    Length: 4331 mm 170.51 in
    Width: 1631 mm 64.21 in
    Kerb weight: 1118 kg 2464.76 lb
    Aerodynamics
    Drag coefficient: 0.34
    Frontal area: 1.91
    Cx: 0.65
    Engine
    Manufacturer: Alfa Romeo
    Type: S-4
    DOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 84.00mm Ч 88.50mm
    Bore / stroke ratio: 0.95
    Displacement: 1962 cc 119.72 cu in
    Compression: 10.10:1
    Fuel system: Bo Mot fuel inj.
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 150.1 PS (148.0 bhp) (110.4 kW)@5800 rpm
    Max. torque: 186.0 Nm (137 lbft) (19 kgm)@3000 rpm
    Coolant: Water
    Specific output: 75.4 bhp/litre
    Specific torque: 94.8 Nm/litre
    Performance
    0-60mph: 9.3 s
    Quarter mile: 16.70s
    Top speed: 203 km/h
    Power to weight: 132.38 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Suspension front: I.W.TB.ARB.
    Suspension rear: dD.WL.CS.ARB.
    Transmission: 5M
    Drive: RWD

    Alfa Romeo 75 2.4 Turbo Diesel 1987
    Dimensions
    Wheelbase: 2510 mm
    Track front: 1368 mm
    Track rear: 1358 mm
    Length: 4331 mm
    Width: 1631 mm
    Ground clearance: 122 mm
    Kerb weight: 1260 kg
    Fuel capacity: 49 l
    Aerodynamics
    Drag coefficient: 0.34
    Engine
    Manufacturer: Alfa Romeo
    Type: S-4
    SOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 92.00mm Ч 90.00mm
    Bore / stroke ratio: 1.02
    Displacement: 2393 cc 146.03 cu in
    Compression: 22.00:1
    Fuel system: Bo VE 4/10 diesel injection pump
    Aspiration: Turbo D.
    Compressor type: 1 KKK 16 turbocharger
    Intercooler: Air/air
    Catalytic Converter: N
    Max. output: 111.5 PS (110.0 bhp) (82 kW)@4200 rpm
    Max. torque: 240.0 Nm (177 lbft) (24.5 kgm)@2400 rpm
    Coolant: Water
    Specific output: 46 bhp/litre
    Specific torque: 100.29 Nm/litre
    Performance
    0-100km/h: 11.7 s
    Kilometre: 33.20s
    Top speed: 185 km/h
    Fuel consumption: 5.5/7.4/8.9 l/100km 90km/h / 120km/h / urban
    Power to weight: 87.3 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion PAS
    Suspension front: I.DW.TB.ARB.
    Suspension rear: dD.WL.CS.ARB.
    Wheels F/R: 6.5J/6.5J
    Tyres front: 195/60 VR 14
    Tyres rear: 195/60 VR 14
    Brakes: Di/Di-S
    Brake diametre: 250/250 mm
    Transmission: 5M
    Drive: RWD
    Top gear ratio: 0.78
    Final drive ratio: 4.56

    Alfa Romeo 75 3.0 V6 1987
    Dimensions
    Wheelbase: 2510 mm 98.81 in
    Track front: 1367 mm 53.81 in
    Track rear: 1356 mm 53.38 in
    Length: 4420 mm 174.01 in
    Width: 1631 mm 64.21 in
    Ground clearance: 120 mm 4.72 in
    Kerb weight: 1210 kg 2667.59 lb
    Weight distribution F/R: 55.4 %
    Fuel capacity: 68 l 17.96 US gal
    Aerodynamics
    Drag coefficient: 0.34
    Frontal area: 1.91
    Cx: 0.65
    Engine
    Code: 119/11
    Manufacturer: Alfa Romeo
    Type: V-6
    in 60° vee
    Wet sumped
    SOHC
    12 valves total
    2 valves per cylinder
    Main bearings: 4
    Bore x stroke: 93.00mm Ч 72.60mm
    Bore / stroke ratio: 1.28
    Displacement: 2959 cc 180.56 cu in
    Compression: 9.50:1
    Fuel system: Bo L-Jet fuel inj.
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 189.6 PS (187.0 bhp) (139.4 kW)@5800 rpm
    Max. torque: 245.0 Nm (181 lbft) (25 kgm)@4000 rpm
    Coolant: Water
    Specific output: 63.2 bhp/litre
    Specific torque: 82.8 Nm/litre
    Performance
    0-60mph: 7.5 s
    0-100mph: 20.6 s
    Quarter mile: 16.10s @ 88.00 mph
    Kilometre: 29.40s @ 180.00 km/h
    Top speed: 220 km/h
    Power to weight: 154.55 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion
    Turns lock-to-lock: 3.250
    Turning circle: 10.90 m
    Suspension front: I.DW.TB.ARB.
    Suspension rear: dD.WL.CS.ARB.
    Wheels F/R: 5.5/6.5
    Tyres front: 195/60 VR 14
    Tyres rear: 195/60 VR 14
    Brakes: VeDi/Di-S
    Brake diametre: 266/250 mm
    Transmission: 5M
    Drive: RWD
    Top gear ratio: 0.78
    Final drive ratio: 3.54

    Alfa Romeo 90 2.0 V6 1987
    Dimensions
    Wheelbase: 2510 mm
    Length: 4390 mm
    Width: 1640 mm
    Kerb weight: 1080 kg
    Engine
    Manufacturer: Alfa Romeo
    Type: V-6
    in 60° vee
    SOHC
    12 valves total
    2 valves per cylinder
    Bore x stroke: 80.00mm Ч 66.20mm
    Bore / stroke ratio: 1.21
    Displacement: 1997 cc 121.86 cu in
    Compression: 10.00:1
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 131.8 PS (130.0 bhp) (96.9 kW)
    Max. torque: 176.0 Nm (130 lbft) (17.9 kgm)
    Coolant: Water
    Specific output: 65.1 bhp/litre
    Specific torque: 88.13 Nm/litre
    Performance
    Kilometre: 30.40s
    Top speed: 195 km/h
    Power to weight: 120.37 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Drive: RWD
    www.facebook.com/workshox

  • #2
    1989 - 1991

    За модели от периода 1989-1991

    Alfa Romeo SZ 1989

    Dimensions
    Wheelbase: 2510 mm 98.81 in
    Track front: 1463 mm 57.59 in
    Track rear: 1425 mm 56.10 in
    Length: 4059 mm 159.80 in
    Width: 1730 mm 68.11 in
    Ground clearance: 120 mm 4.72 in
    Kerb weight: 1256 kg 2769.00 lb
    Weight distribution F/R: 56 %
    Fuel capacity: 68 l 17.96 US gal
    Aerodynamics
    Drag coefficient: 0.3
    Engine
    Code: 61501
    Manufacturer: Alfa Romeo
    Type: V-6
    in 60° vee
    SOHC
    12 valves total
    2 valves per cylinder
    Main bearings: 4
    Bore x stroke: 93.00mm Ч 72.60mm
    Bore / stroke ratio: 1.28
    Displacement: 2959 cc 180.56 cu in
    Compression: 10.00:1
    Fuel system: Bo Mot fuel inj
    Aspiration: Normal
    Catalytic Converter: Y
    Max. output: 204.8 PS (202.0 bhp) (150.6 kW)@6200 rpm
    Max. torque: 245.0 Nm (181 lbft) (25 kgm)@4500 rpm
    Coolant: Water
    Specific output: 68.3 bhp/litre
    Specific torque: 82.8 Nm/litre
    Performance
    0-100km/h: 7 s
    Kilometre: 27.40s
    Top speed: 245 km/h
    Fuel consumption: 7.2/9.2/13.2 l/100km 90km/h / 120km/h / urban
    Power to weight: 160.83 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion
    Turns lock-to-lock: 3.200
    Turning circle: 11.00 m
    Suspension front: I.CS.ARB.
    Suspension rear: dD.STA.WL.CS.ARB.
    Wheels F/R: 7J x 16/8J x 16
    Tyres front: 205/55 ZR 16
    Tyres rear: 225/50 ZR 16
    Brakes: VeDi/VeDi-S
    Brake diametre: 284/250 mm
    Transmission: 5M
    Drive: RWD
    Top gear ratio: 0.78
    Final drive ratio: 3.91

    Alfa Romeo 33 1.3 1990
    Dimensions
    Wheelbase: 2475 mm
    Track front: 1366 mm
    Track rear: 1365 mm
    Length: 4075 mm
    Width: 1613 mm
    Kerb weight: 970 kg
    Fuel capacity: 50 l
    Engine
    Manufacturer: Alfa Romeo
    Type: F-4
    SOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 3
    Bore x stroke: 80.00mm Ч 67.20mm
    Bore / stroke ratio: 1.19
    Displacement: 1351 cc 82.44 cu in
    Compression: 9.50:1
    Fuel system: Marelli IAW fuel inj.
    Aspiration: Normal
    Catalytic Converter: Y
    Max. output: 87.2 PS (86.0 bhp) (64.1 kW)@6000 rpm
    Max. torque: 113.0 Nm (83 lbft) (11.5 kgm)@4500 rpm
    Coolant: Water
    Specific output: 63.7 bhp/litre
    Specific torque: 83.64 Nm/litre
    Performance
    0-100km/h: 11.5 s
    Kilometre: 33.50s
    Top speed: 178 km/h
    Fuel consumption: 5.8/7.8/9.5 l/100km 90km/h / 120km/h / urban
    Power to weight: 88.66 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion
    Turning circle: 11.40 m
    Suspension front: I.MS.LW.CS.ARB.
    Suspension rear: dD.W.PR.CS.
    Wheels F/R: 5.5J x 13/5.5J x 13
    Tyres front: 165/70 TR 13
    Tyres rear: 165/70 TR 13
    Brakes: Di/Dr
    Transmission: 5M
    Drive: FWD
    Top gear ratio: 0.85
    Final drive ratio: 4.11

    Alfa Romeo 33 1.5IE 1990
    Dimensions
    Wheelbase: 2475 mm
    Track front: 1366 mm
    Track rear: 1362 mm
    Length: 4075 mm
    Width: 1613 mm
    Kerb weight: 940 kg
    Fuel capacity: 50 l
    Engine
    Manufacturer: Alfa Romeo
    Type: F-4
    DOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 3
    Bore x stroke: 84.00mm Ч 67.20mm
    Bore / stroke ratio: 1.25
    Displacement: 1490 cc 90.92 cu in
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 99.4 PS (98.0 bhp) (73.1 kW)@6000 rpm
    Max. torque: 129.0 Nm (95 lbft) (13.2 kgm)
    Coolant: Water
    Specific output: 65.8 bhp/litre
    Specific torque: 86.58 Nm/litre
    Performance
    0-60mph: 10 s
    0-100km/h: 10.7 s
    Top speed: 182 km/h
    Power to weight: 104.26 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Suspension front: I.MS.LW.CS.ARB.
    Suspension rear: dD.W.PR.CS.
    Brakes: Di/Dr
    Transmission: 5M
    Drive: FWD

    Alfa Romeo 33 1.7IE 8V 1990
    Dimensions
    Wheelbase: 2475 mm
    Track front: 1366 mm
    Track rear: 1362 mm
    Length: 4075 mm
    Width: 1613 mm
    Kerb weight: 1130 kg
    Fuel capacity: 50 l
    Engine
    Manufacturer: Alfa Romeo
    Type: F-4
    SOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 3
    Bore x stroke: 87.00mm Ч 72.00mm
    Bore / stroke ratio: 1.21
    Displacement: 1712 cc 104.47 cu in
    Compression: 9.50:1
    Fuel system: Bo L3-1 Jet fuel inj.
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 109.5 PS (108.0 bhp) (80.5 kW)@5800 rpm
    Max. torque: 148.0 Nm (109 lbft) (15.1 kgm)@4500 rpm
    Coolant: Water
    Specific output: 63.1 bhp/litre
    Specific torque: 86.45 Nm/litre
    Performance
    0-60mph: 9.1 s
    0-100km/h: 9.4 s
    Quarter mile: 16.50s
    Top speed: 190 km/h
    Power to weight: 95.58 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion PAS
    Turning circle: 11.00 m
    Suspension front: I.MS.LW.CS.ARB.
    Suspension rear: dD.W.PR.CS.
    Brakes: VeDi/Dr-S
    Transmission: 5M
    Drive: FWD
    Top gear ratio: 0.85
    Final drive ratio: 3.89

    Alfa Romeo 33 1.7IE 16V 1990
    Dimensions
    Wheelbase: 2475 mm
    Track front: 1366 mm
    Track rear: 1364 mm
    Length: 4075 mm
    Width: 1613 mm
    Kerb weight: 1000 kg
    Fuel capacity: 50 l
    Engine
    Manufacturer: Alfa Romeo
    Type: F-4
    DOHC
    16 valves total
    4 valves per cylinder
    Main bearings: 3
    Bore x stroke: 87.00mm Ч 72.00mm
    Bore / stroke ratio: 1.21
    Displacement: 1712 cc 104.47 cu in
    Compression: 10.00:1
    Fuel system: Bo Mot ML4-1 fuel inj.
    Aspiration: Normal
    Catalytic Converter: Y
    Max. output: 137.0 PS (136.0 bhp) (94.7 kW)@6500 rpm
    Max. torque: 149.0 Nm (110 lbft) (15.2 kgm)@4600 rpm
    Coolant: Water
    Specific output: 74.2 bhp/litre
    Specific torque: 87.03 Nm/litre
    Performance
    0-100km/h: 8.4 s
    Kilometre: 31.20s
    Top speed: 205 km/h
    Fuel consumption: 5.9/7.9/10.5 l/100km 90km/h / 120km/h / urban
    Power to weight: 127 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion PAS
    Turning circle: 11.00 m
    Suspension front: I.MS.LW.CS.ARB.
    Suspension rear: dD.W.PR.CS.
    Wheels F/R: 5.5J x 14/5.5J x 14
    Tyres front: 185/60 HR 14
    Tyres rear: 185/60 HR 14
    Brakes: VeDi/Dr
    Transmission: 5M
    Drive: FWD
    Top gear ratio: 0.85
    Final drive ratio: 3.89

    Alfa Romeo 33 1.8 Sport Wagon TD 1990
    Wheelbase: 2475 mm 97.44 in
    Track front: 1394 mm 54.88 in
    Track rear: 1362 mm 53.62 in
    Length: 4200 mm 165.35 in
    Width: 1613 mm 63.50 in
    Kerb weight: 1055 kg 2325.87 lb
    Fuel capacity: 50 l
    Engine
    Manufacturer: VM
    Type: S-3
    SOHC
    6 valves total
    2 valves per cylinder
    Bore x stroke: 92.00mm Ч 89.20mm
    Bore / stroke ratio: 1.03
    Displacement: 1779 cc 108.56 cu in
    Compression: 22.00:1
    Fuel system: Bo VE 3/10 F2100 L269 diesel inj.
    Aspiration: Turbo D.
    Compressor type: 1 KKK 14 turbo
    Intercooler: Air-Air
    Catalytic Converter: N
    Max. output: 84.2 PS (83.0 bhp) (61.9 kW)@4200 rpm
    Max. torque: 178.0 Nm (131 lbft) (18.2 kgm)@2400 rpm
    Coolant: Water
    Specific output: 46.7 bhp/litre
    Specific torque: 100.06 Nm/litre
    Performance
    0-100km/h: 13.8 s
    Kilometre: 35.00s
    Top speed: 172 km/h
    Fuel consumption: 4.7/6.7/7.3 l/100km 90km/h / 120km/h / urban
    Power to weight: 78.67 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion PAS
    Turning circle: 11.00 m
    Suspension front: I.MS.LW.CS.ARB.
    Suspension rear: dD.W.PR.CS.
    Wheels F/R: 5.5J x 13/5.5J x 13
    Tyres front: 175/70 TR 13
    Tyres rear: 175/70 TR 13
    Brakes: Di/Dr-S
    Transmission: 5M
    Drive: FWD
    Top gear ratio: 0.79
    Final drive ratio: 3.18

    Alfa Romeo Spider 1.6 1990
    Dimensions
    Wheelbase: 2250 mm 88.58 in
    Track front: 1325 mm 52.16 in
    Track rear: 1275 mm 50.19 in
    Length: 4260 mm 167.71 in
    Width: 1630 mm 64.17 in
    Ground clearance: 125 mm 4.92 in
    Kerb weight: 1070 kg 2358.94 lb
    Fuel capacity: 46 l
    Engine
    Manufacturer: Alfa Romeo
    Type: S-4
    DOHC
    8 valves total
    2 valves per cylinder
    Main bearings: 5
    Bore x stroke: 78.00mm Ч 82.00mm
    Bore / stroke ratio: 0.95
    Displacement: 1567 cc 95.62 cu in
    Compression: 9.00:1
    Fuel system: 2 We carbs
    Aspiration: Normal
    Catalytic Converter: N
    Max. output: 108.5 PS (107.0 bhp) (79.8 kW)@6000 rpm
    Max. torque: 137.0 Nm (101 lbft) (14 kgm)@4800 rpm
    Coolant: Water
    Specific output: 68.3 bhp/litre
    Specific torque: 87.43 Nm/litre
    Performance
    0-100km/h: 10 s
    Quarter mile: 32.50s
    Top speed: 190 km/h
    Power to weight: 100 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: recirculating ball
    Turning circle: 10.70 m
    Suspension front: I.CS.DW.
    Suspension rear: LA.CS.TB.W.
    Brakes: Di/Dr-S
    Transmission: 5M
    Drive: RWD
    Top gear ratio: 0.79
    Final drive ratio: 4.55

    Alfa Romeo 164 V6 Turbo 1990
    Dimensions
    Wheelbase: 2659 mm
    Track front: 1515 mm
    Track rear: 1488 mm
    Length: 4554 mm
    Width: 1760 mm
    Kerb weight: 1440 kg
    Fuel capacity: 70 l
    Engine
    Manufacturer: Alfa Romeo
    Type: V-6
    in 60° vee
    DOHC
    12 valves total
    2 valves per cylinder
    Bore x stroke: 80.00mm Ч 66.20mm
    Bore / stroke ratio: 1.21
    Displacement: 1996 cc 121.80 cu in
    Compression: 8.00:1
    Fuel system: Bo Motronic ML4.1 fuel inj.
    Aspiration: Turbo
    Compressor type: 1 Mitsubishi TD 05H turbocharger
    Intercooler: Y
    Catalytic Converter: N
    Max. output: 209.9 PS (207.0 bhp) (154.4 kW)@6000 rpm
    Max. torque: 289.0 Nm (213 lbft) (29.5 kgm)@2750 rpm
    Coolant: Water
    Specific output: 103.7 bhp/litre
    Specific torque: 144.79 Nm/litre
    Performance
    0-100km/h: 7.9 s
    Kilometre: 27.80s
    Top speed: 243 km/h
    Power to weight: 143.75 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Steering: rack & pinion PAS
    Turning circle: 10.80 m
    Wheels F/R: 6J x 15/6J x 15
    Tyres front: 195/65 ZR 15
    Tyres rear: 195/65 ZR 15
    Brakes: VeDi/Di
    Brake diametre: 284/251 mm
    Transmission: 5M
    Drive: FWD
    Top gear ratio: 0.92
    Final drive ratio: 3.41

    Alfa Romeo Proteo 1991

    Dimensions
    Length: 4148 mm
    Kerb weight: 1467 kg
    Engine
    Manufacturer: Alfa Romeo
    Type: V-6
    DOHC
    24 valves total
    4 valves per cylinder
    Main bearings: 4
    Bore x stroke: 93.00mm Ч 72.60mm
    Bore / stroke ratio: 1.28
    Displacement: 2959 cc 180.56 cu in
    Aspiration: Normal
    Max. output: 263.6 PS (260.0 bhp) (193.9 kW)
    Max. torque:
    Coolant: Water
    Specific output: 87.9 bhp/litre
    Performance
    Top speed: 249 km/h
    Power to weight: 177.23 bhp/ton
    Chasis
    Engine location: Front
    Engine alignment: Longitudinal
    Transmission: 5M
    Drive: AWD
    www.facebook.com/workshox

    Comment


    • #3
      1992 - 1996

      За модели от периода 1992 - 1996

      Alfa Romeo 155 1.6 16V 1992
      Dimensions
      Wheelbase: 2540 mm
      Length: 4443 mm
      Width: 1730 mm
      Fuel capacity: 63 l
      Engine
      Manufacturer: Alfa Romeo
      Type: S-4
      DOHC
      16 valves total
      4 valves per cylinder
      Bore x stroke: 82.00mm Ч 75.65mm
      Bore / stroke ratio: 1.08
      Displacement: 1598 cc 97.51 cu in
      Compression: 10.30:1
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 121.7 PS (120.0 bhp) (89.5 kW)@6300 rpm
      Max. torque: 152.0 Nm (112 lbft) (15.5 kgm)@5000 rpm
      Coolant: Water
      Specific output: 75.1 bhp/litre
      Specific torque: 95.12 Nm/litre
      Performance
      0-100km/h: 11.4 s
      Top speed: 195 km/h
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Suspension front: I.MS.LW.CS.ARB.
      Suspension rear: I.TA.CS.ARB.
      Brakes: VeDi
      Transmission: 5M
      Drive: FWD

      Alfa Romeo 155 1.8 8V 1992
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1469 mm
      Track rear: 1402 mm
      Length: 4445 mm
      Width: 1700 mm
      Kerb weight: 1204 kg
      Fuel capacity: 63 l
      Aerodynamics
      Drag coefficient: 0.29
      Engine
      Manufacturer: Alfa Romeo
      Type: S-4
      SOHC
      8 valves total
      2 valves per cylinder
      Main bearings: 5
      Bore x stroke: 84.00mm Ч 80.00mm
      Bore / stroke ratio: 1.05
      Displacement: 1773 cc 108.19 cu in
      Compression: 10.00:1
      Fuel system: Bo Motronic M 1.7 fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 126.7 PS (125.0 bhp) (93.2 kW)@6000 rpm
      Max. torque: 165.0 Nm (122 lbft) (16.8 kgm)@5000 rpm
      Coolant: Water
      Specific output: 70.5 bhp/litre
      Specific torque: 93.06 Nm/litre
      Performance
      0-100km/h: 10.3 s
      Kilometre: 31.80s
      Top speed: 201 km/h
      Power to weight: 103.82 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Turning circle: 10.50 m
      Suspension front: I.MS.W.CS.ARB.
      Suspension rear: LA.TA.CS.ARB.
      Brakes: VeDi/Di
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.94
      Final drive ratio: 3.56

      Alfa Romeo 155 2.0 8V TS 1992
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1477 mm
      Track rear: 1402 mm
      Length: 4445 mm
      Width: 1700 mm
      Kerb weight: 1214 kg
      Weight distribution F/R: 62 %
      Fuel capacity: 63 l
      Aerodynamics
      Drag coefficient: 0.29
      Engine
      Manufacturer: Fiat
      Type: S-4
      Wet sumped
      SOHC
      8 valves total
      2 valves per cylinder
      Main bearings: 5
      Bore x stroke: 84.00mm Ч 90.00mm
      Bore / stroke ratio: 0.93
      Displacement: 1995 cc 121.74 cu in
      Compression: 10.00:1
      Fuel system: Bo Motronic M1.7 fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 145 PS (143.0 bhp) (106.6 kW)@6000 rpm
      Max. torque: 138.0 Nm (102 lbft) (14.1 kgm)@5000 rpm
      Coolant: Water
      Specific output: 71.7 bhp/litre
      Specific torque: 69.17 Nm/litre
      Performance
      0-60mph: 9.3 s
      0-100mph: 25.5 s
      Quarter mile: 17.10s @ 83.00 mph
      Kilometre: 31.00s @ 172.00 km/h
      Top speed: 200 km/h
      Power to weight: 117.79 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion
      Turns lock-to-lock: 3.100
      Turning circle: 10.70 m
      Suspension front: I.MS.W.CS.ARB.
      Suspension rear: LA.TA.CS.ARB.
      Wheels F/R: 6 x 14/6 x 14
      Tyres front: Goodyear NCT2 195/60 VR 14
      Tyres rear: Goodyear NCT2 195/60 VR 14
      Brakes: VeDi/Di-S-ABS
      Brake diametre: 261/241 mm
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.94
      Final drive ratio: 3.35

      Alfa Romeo 155 2.5 V6 1992
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1477 mm
      Track rear: 1402 mm
      Length: 4445 mm
      Width: 1700 mm
      Kerb weight: 1370 kg
      Fuel capacity: 63.6 l
      Engine
      Manufacturer: Alfa Romeo
      Type: V-6
      SOHC
      12 valves total
      2 valves per cylinder
      Main bearings: 4
      Bore x stroke: 88.00mm Ч 68.30mm
      Bore / stroke ratio: 1.29
      Displacement: 2492 cc 152.07 cu in
      Compression: 10.00:1
      Fuel system: Bo Motronic M 1.7 fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 167.3 PS (165.0 bhp) (123 kW)@5800 rpm
      Max. torque: 216.0 Nm (159 lbft) (22 kgm)@4500 rpm
      Coolant: Water
      Specific output: 66.2 bhp/litre
      Specific torque: 86.68 Nm/litre
      Performance
      0-100km/h: 8.4 s
      Kilometre: 29.40s
      Top speed: 216 km/h
      Power to weight: 120.44 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Suspension front: I.MS.W.CS.ARB.
      Suspension rear: LA.TA.CS.ARB.
      Brakes: VeDi/Di-S-ABS
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.92
      Final drive ratio: 3.41

      Alfa Romeo 164 24V Super 1992
      Dimensions
      Wheelbase: 2660 mm
      Track front: 1515 mm
      Track rear: 1488 mm
      Length: 4665 mm
      Width: 1760 mm
      Kerb weight: 1500 kg
      Fuel capacity: 70 l
      Engine
      Manufacturer: Alfa Romeo
      Type: V-6
      in 60° vee
      DOHC
      24 valves total
      4 valves per cylinder
      Main bearings: 4
      Bore x stroke: 93.00mm Ч 72.60mm
      Bore / stroke ratio: 1.28
      Displacement: 2959 cc 180.56 cu in
      Compression: 10.00:1
      Fuel system: Bo Motronic M 1.7 fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 209.9 PS (207.0 bhp) (154.4 kW)@6300 rpm
      Max. torque: 270.0 Nm (199 lbft) (27.5 kgm)@5000 rpm
      Coolant: Water
      Specific output: 70 bhp/litre
      Specific torque: 91.25 Nm/litre
      Performance
      0-100km/h: 8 s
      Kilometre: 28.00s
      Top speed: 240 km/h
      Power to weight: 138 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.92
      Final drive ratio: 3.35

      Alfa Romeo 75 1.6IE 1992
      Dimensions
      Wheelbase: 2510 mm
      Track front: 1368 mm
      Track rear: 1358 mm
      Length: 4331 mm
      Width: 1631 mm
      Ground clearance: 122 mm
      Kerb weight: 1090 kg
      Fuel capacity: 49 l
      Aerodynamics
      Drag coefficient: 0.34
      Engine
      Manufacturer: Alfa Romeo
      Type: S-4
      DOHC
      8 valves total
      2 valves per cylinder
      Main bearings: 5
      Bore x stroke: 78.00mm Ч 82.00mm
      Bore / stroke ratio: 0.95
      Displacement: 1570 cc 95.80 cu in
      Compression: 9.00:1
      Fuel system: Bo Motronic ML 4.1
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 104.4 PS (103.0 bhp) (76.8 kW)@5800 rpm
      Max. torque: 132.0 Nm (97 lbft) (13.5 kgm)@3800 rpm
      Coolant: Water
      Specific output: 65.6 bhp/litre
      Specific torque: 84.08 Nm/litre
      Performance
      0-100km/h: 11.3 s
      Kilometre: 33.00s
      Top speed: 180 km/h
      Power to weight: 94.5 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Longitudinal
      Steering: rack & pinion
      Turning circle: 10.90 m
      Suspension front: I.DW.TB.ARB.
      Suspension rear: dD.WL.CS.ARB.
      Brakes: Di/Di
      Transmission: 5M
      Drive: RWD
      Top gear ratio: 0.78
      Final drive ratio: 4.56

      Alfa Romeo 75 1.8IE 1992
      Dimensions
      Wheelbase: 2510 mm
      Track front: 1367 mm
      Track rear: 1356 mm
      Length: 4331 mm
      Width: 1631 mm
      Ground clearance: 120 mm
      Kerb weight: 1100 kg
      Fuel capacity: 49 l
      Aerodynamics
      Drag coefficient: 0.34
      Engine
      Manufacturer: Alfa Romeo
      Type: S-4
      DOHC
      8 valves total
      2 valves per cylinder
      Bore x stroke: 80.00mm Ч 88.50mm
      Bore / stroke ratio: 0.9
      Displacement: 1779 cc 108.56 cu in
      Compression: 9.50:1
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 121.7 PS (120.0 bhp) (89.5 kW)@5500 rpm
      Max. torque:

      Coolant: Water
      Specific output: 67.5 bhp/litre
      Performance
      0-100km/h: 10.4 s
      Top speed: 190 km/h
      Power to weight: 109.09 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Longitudinal
      Steering: rack & pinion
      Turning circle: 10.90 m
      Suspension front: I.DW.TB.ARB.
      Suspension rear: dD.WL.CS.ARB.
      Brakes: Di/Di
      Transmission: 5M
      Drive: RWD
      Top gear ratio: 0.78
      Final drive ratio: 4.3

      Alfa Romeo RZ 1993

      Dimensions
      Wheelbase: 2510 mm
      Track front: 1464 mm
      Track rear: 1426 mm
      Length: 4059 mm
      Width: 1730 mm
      Ground clearance: 100 mm
      Kerb weight: 1380 kg
      Fuel capacity: 70 l
      Engine
      Manufacturer: Alfa Romeo
      Type: V-6
      in 60° vee
      SOHC
      12 valves total
      2 valves per cylinder
      Main bearings: 4
      Bore x stroke: 93.00mm Ч 72.60mm
      Bore / stroke ratio: 1.28
      Displacement: 2959 cc 180.56 cu in
      Compression: 10.00:1
      Fuel system: Bo Motronic ML 4.1 fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 206.8 PS (204.0 bhp) (152.1 kW)@6200 rpm
      Max. torque: 245.0 Nm (181 lbft) (25 kgm)@4500 rpm
      Coolant: Water
      Specific output: 68.9 bhp/litre
      Specific torque: 82.8 Nm/litre
      Performance
      0-100km/h: 7.5 s
      Kilometre: 29.10s
      Top speed: 230 km/h
      Fuel consumption: 7.2/9.3/13.2 l/100km 90km/h /120km/h / urban
      Power to weight: 147.83 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Longitudinal
      Steering: rack & pinion PAS
      Suspension front: I.CS.ARB.
      Suspension rear: dD.
      Wheels F/R: 7J x 16/8J x 16
      Tyres front: 205/55 ZR 16
      Tyres rear: 225/50 ZR 16
      Brakes: VeDi/VeDi-S
      Transmission: 5M
      Drive: RWD
      Top gear ratio: 0.78
      Final drive ratio: 3.91

      Alfa Romeo 146 1.3/1.4 1994
      Dimensions
      Wheelbase: 2540 mm 100.00 in
      Length: 4257 mm 167.59 in
      Width: 1712 mm 67.40 in
      Kerb weight: 1175 kg 2590.42 lb
      Fuel capacity: 50.9 l
      Engine
      Manufacturer: Alfa Romeo
      Type: F-4
      DOHC
      8 valves total
      2 valves per cylinder
      Bore x stroke: 80.00mm Ч 67.20mm
      Bore / stroke ratio: 1.19
      Displacement: 1351 cc 82.44 cu in
      Fuel system: Weber Marelli IAW MPFi
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 91.3 PS (90.0 bhp) (67.1 kW)@6000 rpm
      Max. torque: 115.0 Nm (85 lbft) (11.7 kgm)@4400 rpm
      Coolant: Water
      Specific output: 66.6 bhp/litre
      Specific torque: 85.12 Nm/litre
      Performance
      0-100km/h: 12.8 s
      Top speed: 179 km/h
      Power to weight: 76.6 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Suspension front: I.MS.CS.ARB.
      Suspension rear: I.TA.CS.
      Brakes: Di/Dr-S
      Transmission: 5M
      Drive: FWD

      Alfa Romeo 146 1.6 1994
      Dimensions
      Wheelbase: 2540 mm
      Length: 4257 mm
      Width: 1712 mm
      Kerb weight: 1175 kg
      Fuel capacity: 50.9 l
      Engine
      Manufacturer: Alfa Romeo
      Type: F-4
      DOHC
      8 valves total
      2 valves per cylinder
      Bore x stroke: 84.00mm Ч 72.00mm
      Bore / stroke ratio: 1.17
      Displacement: 1596 cc 97.39 cu in
      Compression: 9.50:1
      Fuel system: Bo Motronic fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 104.4 PS (103.0 bhp) (76.8 kW)@6000 rpm
      Max. torque: 134.0 Nm (99 lbft) (13.7 kgm)@4500 rpm
      Coolant: Water
      Specific output: 64.5 bhp/litre
      Specific torque: 83.96 Nm/litre
      Performance
      0-60mph: 11.4 s
      Top speed: 183 km/h
      Power to weight: 87.66 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Turns lock-to-lock: 2.700
      Suspension front: I.MS.CS.ARB.
      Suspension rear: I.TA.CS.
      Brakes: Di/Dr-S-ABS
      Transmission: 5M
      Drive: FWD

      Alfa Romeo 145 1.7 16V 1994
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1477 mm
      Track rear: 1402 mm
      Length: 4093 mm
      Width: 1712 mm
      Kerb weight: 1190 kg
      Fuel capacity: 51 l
      Aerodynamics
      Drag coefficient: 0.32
      Engine
      Manufacturer: Alfa Romeo
      Type: F-4
      DOHC
      16 valves total
      4 valves per cylinder
      Bore x stroke: 87.00mm Ч 72.00mm
      Bore / stroke ratio: 1.21
      Displacement: 1712 cc 104.47 cu in
      Compression: 10.00:1
      Fuel system: Bo Motronic fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 130.8 PS (129.0 bhp) (96.2 kW)@6500 rpm
      Max. torque: 149.0 Nm (110 lbft) (15.2 kgm)@4300 rpm
      Coolant: Water
      Specific output: 75.4 bhp/litre
      Specific torque: 87.03 Nm/litre
      Performance
      0-60mph: 9.7 s
      Quarter mile: 17.20s
      Top speed: 200 km/h
      Power to weight: 108.4 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Turns lock-to-lock: 2.700
      Suspension front: I.MS.CS.ARB.
      Suspension rear: I.TA.CS.
      Brakes: Di/Di-S-ABS
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.85
      Final drive ratio: 4.11

      Alfa Romeo 145 1.6 1994
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1477 mm
      Track rear: 1402 mm
      Length: 4093 mm
      Width: 1712 mm
      Kerb weight: 1140 kg
      Fuel capacity: 51 l
      Aerodynamics
      Drag coefficient: 0.32
      Engine
      Manufacturer: Alfa Romeo
      Type: F-4
      DOHC
      8 valves total
      2 valves per cylinder
      Bore x stroke: 84.00mm Ч 72.00mm
      Bore / stroke ratio: 1.17
      Displacement: 1596 cc 97.39 cu in
      Compression: 9.50:1
      Fuel system: Bo Motronic fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 104.4 PS (103.0 bhp) (76.8 kW)@6000 rpm
      Max. torque: 134.0 Nm (99 lbft) (13.7 kgm)@4500 rpm
      Coolant: Water
      Specific output: 64.5 bhp/litre
      Specific torque: 83.96 Nm/litre
      Performance
      0-60mph: 10.8 s
      Top speed: 185 km/h
      Power to weight: 90.35 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Turns lock-to-lock: 2.700
      Suspension front: I.MS.CS.ARB.
      Suspension rear: I.TA.CS.
      Brakes: Di/Dr-S-ABS
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.85
      Final drive ratio: 4.11

      Alfa Romeo 155 2.0 16V TS 1995
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1493 mm
      Track rear: 1427 mm
      Length: 4442 mm
      Width: 1730 mm
      Kerb weight: 1300 kg
      Fuel capacity: 63 l
      Engine
      Manufacturer: Alfa Romeo
      Type: S-4
      DOHC
      16 valves total
      4 valves per cylinder
      Bore x stroke: 83.00mm Ч 91.00mm
      Bore / stroke ratio: 0.91
      Displacement: 1970 cc 120.21 cu in
      Compression: 10.00:1
      Fuel system: Fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 152.1 PS (150.0 bhp) (111.9 kW)@6200 rpm
      Max. torque: 186.0 Nm (137 lbft) (19 kgm)@4000 rpm
      Coolant: Water
      Specific output: 76.1 bhp/litre
      Specific torque: 94.42 Nm/litre
      Performance
      0-60mph: 9.3 s
      0-100mph: 26.9 s
      Top speed: 208 km/h
      Power to weight: 115.38 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Turns lock-to-lock: 2.100
      Turning circle: 11.00 m
      Suspension front: I.MS.CS.ARB.
      Suspension rear: I.TA.CS.ARB.
      Wheels F/R: 6.5 x 15/6.5 x 15
      Tyres front: 205/50 VR 15
      Tyres rear: 205/50 VR 15
      Brakes: VeDi/Di-ABS
      Brake diametre: 284/240 mm
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.95
      Final drive ratio: 3.35

      Alfa Romeo GTV 2.0 16V TS 1995
      Dimensions
      Wheelbase: 2540 mm 100.00 in
      Track front: 1499 mm 59.01 in
      Track rear: 1506 mm 59.29 in
      Length: 4285 mm 168.70 in
      Width: 1780 mm 70.07 in
      Kerb weight: 1370 kg 3020.32 lb
      Weight distribution F/R: 61 %
      Fuel capacity: 70 l
      Engine
      Manufacturer: Alfa Romeo
      Type: S-4
      DOHC
      16 valves total
      4 valves per cylinder
      Bore x stroke: 83.00mm Ч 91.00mm
      Bore / stroke ratio: 0.91
      Displacement: 1970 cc 120.21 cu in
      Compression: 10.00:1
      Fuel system: Bo Motronic M2.10.3 fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 152.1 PS (150.0 bhp) (111.9 kW)@6200 rpm
      Max. torque: 186.0 Nm (137 lbft) (19 kgm)@4000 rpm
      Coolant: Water
      Specific output: 76.1 bhp/litre
      Specific torque: 94.42 Nm/litre
      Performance
      0-60mph: 8 s
      0-100mph: 22.8 s
      Quarter mile: 16.20s
      Kilometre: 29.20s
      Top speed: 209 km/h
      Power to weight: 109.49 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Turns lock-to-lock: 2.100
      Turning circle: 10.80 m
      Suspension front: I.MS.LW.CS.ARB.
      Suspension rear: I.MultiLi.CS.
      Brakes: VeDi/Di-ABS
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.95
      Final drive ratio: 3.56

      Alfa Romeo Spider 2.0 Turbo 1995
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1499 mm
      Track rear: 1487 mm
      Length: 4285 mm
      Width: 1780 mm
      Kerb weight: 1430 kg
      Fuel capacity: 70 l
      Engine
      Manufacturer: Alfa Romeo
      Type: V-6
      DOHC
      12 valves total
      2 valves per cylinder
      Bore x stroke: 80.00mm Ч 66.20mm
      Bore / stroke ratio: 1.21
      Displacement: 1996 cc 121.80 cu in
      Compression: 8.00:1
      Fuel system: Bo Motronic ML4.1 fuel inj.
      Aspiration: Turbo
      Compressor type: 1 Garrett T25 turbo
      Intercooler: Y
      Catalytic Converter: Y
      Max. output: 202.8 PS (200.0 bhp) (149.1 kW)@6000 rpm
      Max. torque: 280.0 Nm (207 lbft) (28.6 kgm)@2400 rpm
      Coolant: Water
      Specific output: 100.2 bhp/litre
      Specific torque: 140.28 Nm/litre
      Performance
      0-100km/h: 7.7 s
      Kilometre: 27.90s
      Top speed: 228 km/h
      Power to weight: 139.86 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Turns lock-to-lock: 2.100
      Turning circle: 11.20 m
      Suspension front: I.MS.LW.CS.ARB.
      Suspension rear: I.MultiLi.CS.
      Brakes: VeDi/Di-ABS
      Transmission: 5M
      Drive: FWD
      Top gear ratio: 0.91
      Final drive ratio: 3.35

      Alfa Romeo Spider 3.0 V6 1995
      Dimensions
      Wheelbase: 2540 mm
      Track front: 1499 mm
      Track rear: 1487 mm
      Length: 4285 mm
      Width: 1780 mm
      Kerb weight: 1420 kg
      Fuel capacity: 70 l
      Engine
      Manufacturer: Alfa Romeo
      Type: V-6
      SOHC
      12 valves total
      2 valves per cylinder
      Main bearings: 4
      Bore x stroke: 93.00mm Ч 72.60mm
      Bore / stroke ratio: 1.28
      Displacement: 2959 cc 180.56 cu in
      Compression: 10.00:1
      Fuel system: Bo M3.7.1 Motronic fuel inj.
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 194.7 PS (192.0 bhp) (143.2 kW)@5600 rpm
      Max. torque: 260.0 Nm (192 lbft) (26.5 kgm)@4400 rpm
      Coolant: Water
      Specific output: 64.9 bhp/litre
      Specific torque: 87.87 Nm/litre
      Performance
      0-60mph: 7.1 s
      0-100km/h: 7.4 s
      Kilometre: 27.80s
      Top speed: 225 km/h
      Power to weight: 135.21 bhp/ton
      Chasis
      Engine location: Front
      Engine alignment: Transverse
      Steering: rack & pinion PAS
      Turns lock-to-lock: 2.600
      Turning circle: 10.90 m
      Suspension front: I.MS.LW.CS.ARB.
      Suspension rear: I.MultiLi.CS.
      Brakes: VeDi/Di-ABS
      Transmission: 5M
      Drive: FWD

      Alfa Romeo Nuvola 1996

      Wheelbase: 2600 mm
      Track front: 1577 mm
      Track rear: 1602 mm
      Length: 4286 mm
      Width: 1859 mm
      Engine
      Manufacturer: Alfa Romeo
      Type: V-6
      DOHC
      24 valves total
      4 valves per cylinder
      Main bearings: 4
      Bore x stroke: 93.00mm Ч 72.60mm
      Bore / stroke ratio: 1.28
      Displacement: 2959 cc 180.56 cu in
      Aspiration: Normal
      Catalytic Converter: Y
      Max. output: 304.2 PS (300.0 bhp) (223.7 kW)@6000 rpm
      Max. torque: 387.0 Nm (285 lbft) (39.5 kgm)@3000 rpm
      Coolant: Water
      Specific output: 101.4 bhp/litre
      Specific torque: 130.79 Nm/litre
      Performance
      0-60mph: 6 s
      Top speed: 280 km/h
      Chasis
      Engine location: Front
      Engine alignment: Longitudinal
      Transmission: 6M
      Drive: AWD
      www.facebook.com/workshox

      Comment


      • #4
        1997 - 1998

        За модели от периода 1997 - 1998

        Alfa Romeo 156 1.6 16V TS 1997
        Dimensions
        Wheelbase: 2595 mm 102.16 in
        Track front: 1519 mm 59.80 in
        Track rear: 1506 mm 59.29 in
        Length: 4430 mm 174.40 in
        Width: 1745 mm 68.70 in
        Kerb weight: 1230 kg 2711.68 lb
        Fuel capacity: 63 l
        Engine
        Manufacturer: Alfa Romeo
        Type: S-4
        DOHC
        16 valves total
        4 valves per cylinder
        Bore x stroke: 82.00mm Ч 75.65mm
        Bore / stroke ratio: 1.08
        Displacement: 1598 cc 97.51 cu in
        Compression: 10.30:1
        Fuel system: Bo Motronic M2.10.4 MPFi
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 119.6 PS (118.0 bhp) (88 kW)@6300 rpm
        Max. torque: 144.0 Nm (106 lbft) (14.7 kgm)@4500 rpm
        Coolant: Water
        Specific output: 73.8 bhp/litre
        Specific torque: 90.11 Nm/litre
        Performance
        0-100km/h: 10.5 s
        Kilometre: 31.80s
        Top speed: 200 km/h
        Fuel consumption: 11.4/6.4/8.2 l/100km urban/extra-urban/combined
        Power to weight: 95.93 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.10 m
        Suspension front: I.DW.TA.ARB.
        Suspension rear: I.MS.ARB.
        Tyres front: 185/65 HR 15
        Tyres rear: 185/65 HR 15
        Brakes: Di/Di
        Brake diametre: 281/251 mm
        Transmission: 5M
        Drive: FWD
        Top gear ratio: 0.97
        Final drive ratio: 3.73

        Alfa Romeo 156 1.8 16V TS 1997

        Dimensions
        Wheelbase: 2595 mm
        Track front: 1519 mm
        Track rear: 1506 mm
        Length: 4430 mm
        Width: 1745 mm
        Kerb weight: 1230 kg
        Fuel capacity: 63 l
        Engine
        Manufacturer: Alfa Romeo
        Type: S-4
        DOHC
        16 valves total
        4 valves per cylinder
        Bore x stroke: 82.00mm Ч 82.70mm
        Bore / stroke ratio: 0.99
        Displacement: 1747 cc 106.60 cu in
        Compression: 10.30:1
        Fuel system: Bo Motronic M1.5.5 MPFi
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 144 PS (142.0 bhp) (105.9 kW)@6500 rpm
        Max. torque: 169.0 Nm (125 lbft) (17.2 kgm)@3500 rpm
        Coolant: Water
        Specific output: 81.3 bhp/litre
        Specific torque: 96.74 Nm/litre
        Performance
        0-100km/h: 9.3 s
        Kilometre: 30.50s
        Top speed: 210 km/h
        Fuel consumption: 11.4/6.4/8.2 l/100km urban/extra-urban/combined
        Power to weight: 115.45 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.10 m
        Suspension front: I.DW.TA.ARB.
        Suspension rear: I.MS.ARB.
        Tyres front: 185/65 VR 15
        Tyres rear: 185/65 VR 15
        Brakes: Di/Di
        Brake diametre: 281/251 mm
        Transmission: 5M
        Drive: FWD
        Top gear ratio: 0.92
        Final drive ratio: 3.73

        Alfa Romeo 156 1.9 JTD 1997
        Dimensions
        Wheelbase: 2595 mm
        Track front: 1519 mm
        Track rear: 1506 mm
        Length: 4430 mm
        Width: 1745 mm
        Kerb weight: 1270 kg
        Fuel capacity: 63 l
        Engine
        Manufacturer: Alfa Romeo
        Type: S-4
        SOHC
        8 valves total
        2 valves per cylinder
        Bore x stroke: 82.00mm Ч 90.40mm
        Bore / stroke ratio: 0.91
        Displacement: 1910 cc 116.55 cu in
        Compression: 18.45:1
        Fuel system: Direct injection
        Aspiration: Turbo D.
        Intercooler: Y
        Catalytic Converter: Y
        Max. output: 104.4 PS (103.0 bhp) (76.8 kW)@4000 rpm
        Max. torque: 255.0 Nm (188 lbft) (26 kgm)@2000 rpm
        Coolant: Water
        Specific output: 53.9 bhp/litre
        Specific torque: 133.51 Nm/litre
        Performance
        0-100km/h: 10.5 s
        Kilometre: 32.80s
        Top speed: 188 km/h
        Fuel consumption: 7.8/4.7/5.8 l/100km urban/extra-urban/combined
        Power to weight: 81.1 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.60 m
        Suspension front: I.DW.TA.ARB.
        Suspension rear: I.MS.ARB.
        Tyres front: 185/65 HR 15
        Tyres rear: 185/65 HR 15
        Brakes: Di/Di
        Brake diametre: 281/251 mm
        Transmission: 5M
        Drive: FWD
        Top gear ratio: 0.76
        Final drive ratio: 3.35

        Alfa Romeo 156 2.0 16V TS 1997

        Dimensions
        Wheelbase: 2595 mm
        Track front: 1511 mm
        Track rear: 1545 mm
        Length: 4430 mm
        Width: 1745 mm
        Kerb weight: 1250 kg
        Fuel capacity: 63 l
        Engine
        Manufacturer: Alfa Romeo
        Type: S-4
        DOHC
        16 valves total
        4 valves per cylinder
        Bore x stroke: 83.00mm Ч 91.00mm
        Bore / stroke ratio: 0.91
        Displacement: 1970 cc 120.21 cu in
        Compression: 10.00:1
        Fuel system: EFi
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 154.1 PS (152.0 bhp) (113.3 kW)@6400 rpm
        Max. torque: 187.0 Nm (138 lbft) (19.1 kgm)@3500 rpm
        Coolant: Water
        Specific output: 77.2 bhp/litre
        Specific torque: 94.92 Nm/litre
        Performance
        0-60mph: 8.1 s
        0-100mph: 22 s
        Top speed: 208 km/h
        Fuel consumption: 11.7/6.6/8.5 l/100km urban/extra-urban/combined
        Power to weight: 121.6 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turns lock-to-lock: 2.200
        Turning circle: 11.10 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.ARB.
        Tyres front: 205/60 VR 15
        Tyres rear: 205/60 VR 15
        Brakes: VeDi/Di-S
        Brake diametre: 284/251 mm
        Transmission: 5M
        Drive: FWD
        Top gear ratio: 0.95
        Final drive ratio: 3.56

        Alfa Romeo 156 2.4 TD 1997
        Dimensions
        Wheelbase: 2595 mm
        Track front: 1511 mm
        Track rear: 1545 mm
        Length: 4430 mm
        Width: 1745 mm
        Kerb weight: 1350 kg
        Fuel capacity: 63 l
        Engine
        Manufacturer: Fiat
        Type: S-5
        SOHC
        10 valves total
        2 valves per cylinder
        Bore x stroke: 82.00mm Ч 90.40mm
        Bore / stroke ratio: 0.91
        Displacement: 2387 cc 145.66 cu in
        Compression: 18.45:1
        Fuel system: DDi
        Aspiration: Turbo D.
        Intercooler: Y
        Max. output: 135.9 PS (134.0 bhp) (99.9 kW)@4200 rpm
        Max. torque: 304.0 Nm (224 lbft) (31 kgm)@2000 rpm
        Coolant: Water
        Specific output: 56.1 bhp/litre
        Specific torque: 127.36 Nm/litre
        Performance
        Fuel consumption: 8.9/5.4/6.7 l/100km urban/extra-urban/combined
        Power to weight: 99.26 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turns lock-to-lock: 2.100
        Turning circle: 11.60 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.ARB.
        Tyres front: 185/65 VR 15
        Tyres rear: 185/65 VR 15
        Brakes: VeDi/Di-S
        Brake diametre: 284/251 mm
        Transmission: 5M
        Drive: FWD
        Top gear ratio: 0.76
        Final drive ratio: 3.18

        Alfa Romeo 156 2.5 V6 TS 1997

        Dimensions
        Wheelbase: 2595 mm
        Track front: 1511 mm
        Track rear: 1545 mm
        Length: 4430 mm
        Width: 1745 mm
        Kerb weight: 1320 kg
        Fuel capacity: 63 l
        Engine
        Manufacturer: Alfa Romeo
        Type: V-6
        in 60° vee
        DOHC
        24 valves total
        4 valves per cylinder
        Bore x stroke: 88.00mm Ч 68.30mm
        Bore / stroke ratio: 1.29
        Displacement: 2492 cc 152.07 cu in
        Compression: 10.30:1
        Fuel system: Bo Motronic ME2.1 MPi
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 189.6 PS (187.0 bhp) (139.4 kW)@6300 rpm
        Max. torque: 222.0 Nm (164 lbft) (22.6 kgm)@5000 rpm
        Coolant: Water
        Specific output: 75 bhp/litre
        Specific torque: 89.09 Nm/litre
        Performance
        0-60mph: 7.2 s
        0-100km/h: 7.3 s
        0-100mph: 18.6 s
        Quarter mile: 15.80s @ 92.00 mph
        Kilometre: 27.80s @ 187.00 km/h
        Top speed: 230 km/h
        Fuel consumption: 16.5/8.4/11.4 l/100km urban/extra-urban/combined
        Power to weight: 141.67 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turns lock-to-lock: 2.100
        Turning circle: 11.60 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.ARB.
        Tyres front: 205/60 WR 15
        Tyres rear: 205/60 Wr 16
        Brakes: VeDi/Di-S
        Brake diametre: 284/251 mm
        Transmission: 6M
        Drive: FWD
        Top gear ratio: 0.82
        Final drive ratio: 3.94

        Alfa Romeo GTV 1.8 TS 1997

        Dimensions
        Wheelbase: 2540 mm
        Track front: 1499 mm
        Track rear: 1487 mm
        Length: 4285 mm
        Width: 1780 mm
        Kerb weight: 1350 kg
        Fuel capacity: 70 l
        Engine
        Manufacturer: Alfa Romeo
        Type: S-4
        DOHC
        16 valves total
        4 valves per cylinder
        Main bearings: 5
        Bore x stroke: 82.00mm Ч 82.70mm
        Bore / stroke ratio: 0.99
        Displacement: 1747 cc 106.60 cu in
        Compression: 10.30:1
        Fuel system: Bo Motronic M 1.5.5 fuel inj.
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 146 PS (144.0 bhp) (107.4 kW)@6500 rpm
        Max. torque: 169.0 Nm (125 lbft) (17.2 kgm)@3500 rpm
        Coolant: Water
        Specific output: 82.4 bhp/litre
        Specific torque: 96.74 Nm/litre
        Performance
        0-100km/h: 9.2 s
        Kilometre: 30.50s
        Top speed: 210 km/h
        Power to weight: 106.67 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.20 m
        Suspension front: I.MS.W.ARB.
        Suspension rear: I.DW.CS.ARB.
        Brakes: VeDi/Di-S
        Transmission: 5M
        Drive: FWD
        Top gear ratio: 0.95
        Final drive ratio: 3.73

        Alfa Romeo GTV 3.0 24V 1997

        Bodywork
        Type: 2S FHC
        Designer: Pininfarina
        Number of doors: 2
        Dimensions
        Wheelbase: 2540 mm
        Track front: 1508 mm
        Track rear: 1530 mm
        Length: 4285 mm
        Width: 1780 mm
        Kerb weight: 1415 kg
        Fuel capacity: 70 l
        Engine
        Manufacturer: Alfa Romeo
        Type: V-6
        DOHC
        24 valves total
        4 valves per cylinder
        Bore x stroke: 93.00mm Ч 72.60mm
        Bore / stroke ratio: 1.28
        Displacement: 2959 cc 180.56 cu in
        Compression: 10.00:1
        Fuel system: Bo Motronic ME2.1 MPFi
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 223.1 PS (220.0 bhp) (164.1 kW)@6300 rpm
        Max. torque: 270.0 Nm (199 lbft) (27.5 kgm)@5000 rpm
        Coolant: Water
        Specific output: 74.3 bhp/litre
        Specific torque: 91.25 Nm/litre
        Performance
        0-60mph: 6.6 s
        0-100km/h: 6.7 s
        0-100mph: 16 s
        Quarter mile: 15.10s @ 96.00 mph
        Kilometre: 26.80s @ 198.00 km/h
        Top speed: 250 km/h
        Fuel consumption: 32.4
        Power to weight: 155.48 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 12.00 m
        Suspension front: I.MS.W.ARB.
        Suspension rear: I.DW.CS.ARB.
        Brakes: VeDi/Di-ABS
        Transmission: 6M
        Drive: FWD
        Top gear ratio: 0.82
        Final drive ratio: 3.56

        Alfa Romeo Scighera 1997

        Dimensions
        Wheelbase: 2600 mm
        Track front: 1655 mm
        Track rear: 1630 mm
        Length: 4320 mm
        Width: 1980 mm
        Kerb weight: 1450 kg
        Engine
        Manufacturer: Alfa Romeo
        Type: V-6
        SOHC
        24 valves total
        4 valves per cylinder
        Bore x stroke: 93.00mm Ч 72.60mm
        Bore / stroke ratio: 1.28
        Displacement: 2959 cc 180.56 cu in
        Aspiration: Turbo
        Compressor type: 2 turbochargers
        Max. output: 405.6 PS (400.0 bhp) (298.3 kW)@7500 rpm
        Max. torque:

        Coolant: Water
        Specific output: 135.2 bhp/litre
        Performance
        0-100km/h: 4.9 s
        Top speed: 300 km/h
        Power to weight: 275.86 bhp/ton
        Chasis
        Engine location: Mid
        Engine alignment: Longitudinal
        Transmission: 6M
        Drive: AWD

        Alfa Romeo 166 2.0 16V TS 1998

        Dimensions
        Wheelbase: 2700 mm
        Track front: 1545 mm
        Track rear: 1532 mm
        Length: 4720 mm
        Width: 1815 mm
        Kerb weight: 1420 kg
        Fuel capacity: 72 l
        Engine
        Manufacturer: Alfa Romeo
        Type: S-4
        Wet sumped
        DOHC
        16 valves total
        4 valves per cylinder
        Bore x stroke: 83.00mm Ч 91.00mm
        Bore / stroke ratio: 0.91
        Displacement: 1970 cc 120.21 cu in
        Compression: 10.00:1
        Fuel system: Bo Motronic M1.5.5 fuel inj.
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 157.2 PS (155.0 bhp) (115.6 kW)@6400 rpm
        Max. torque: 187.0 Nm (138 lbft) (19.1 kgm)@2800 rpm
        Coolant: Water
        Specific output: 78.7 bhp/litre
        Specific torque: 94.92 Nm/litre
        Performance
        0-100km/h: 9.6 s
        Kilometre: 30.60s
        Top speed: 213 km/h
        Power to weight: 109.15 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.60 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.MultiLi.LW.CS.ARB.
        Tyres front: 205/55 WR 16
        Tyres rear: 205/55 WR 16
        Brakes: VeDi/Di-S-ABS
        Brake diametre: 281/276 mm
        Transmission: 5M
        Drive: FWD
        Top gear ratio: 0.91
        Final drive ratio: 3.94

        Alfa Romeo 166 2.0 V6 Turbo 1998
        Dimensions
        Wheelbase: 2700 mm
        Track front: 1545 mm
        Track rear: 1532 mm
        Length: 4720 mm
        Width: 1815 mm
        Kerb weight: 1495 kg
        Fuel capacity: 72 l
        Engine
        Manufacturer: Alfa Romeo
        Type: V-6
        Wet sumped
        SOHC
        12 valves total
        2 valves per cylinder
        Bore x stroke: 80.00mm Ч 66.20mm
        Bore / stroke ratio: 1.21
        Displacement: 1996 cc 121.80 cu in
        Compression: 8.00:1
        Fuel system: Bo Motronic ME2.1 fuel inj.
        Aspiration: Turbo
        Intercooler: Y
        Catalytic Converter: Y
        Max. output: 207.8 PS (205.0 bhp) (152.9 kW)@6000 rpm
        Max. torque: 280.0 Nm (207 lbft) (28.6 kgm)@2500 rpm
        Coolant: Water
        Specific output: 102.7 bhp/litre
        Specific torque: 140.28 Nm/litre
        Performance
        0-100km/h: 8.1 s
        Kilometre: 28.40s
        Top speed: 237 km/h
        Power to weight: 137.12 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.60 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.MultiLi.LW.CS.ARB.
        Brakes: VeDi/Di-S-ABS
        Transmission: 6M
        Drive: FWD
        Top gear ratio: 0.82
        Final drive ratio: 3.73

        Alfa Romeo 166 2.4 JTD 1998
        Dimensions
        Wheelbase: 2700 mm
        Track front: 1545 mm
        Track rear: 1532 mm
        Length: 4720 mm
        Width: 1815 mm
        Kerb weight: 1490 kg
        Fuel capacity: 72 l
        Engine
        Type: S-5
        Wet sumped
        SOHC
        10 valves total
        2 valves per cylinder
        Bore x stroke: 82.00mm Ч 90.40mm
        Bore / stroke ratio: 0.91
        Displacement: 2387 cc 145.66 cu in
        Compression: 18.45:1
        Fuel system: Bo EDC 15 diesel inj.
        Aspiration: Turbo D.
        Compressor type: 1 Garrett VNT 25 turbo
        Intercooler: Y
        Max. output: 137.9 PS (136.0 bhp) (101.4 kW)@4000 rpm
        Max. torque: 304.0 Nm (224 lbft) (31 kgm)@2000 rpm
        Coolant: Water
        Specific output: 57 bhp/litre
        Specific torque: 127.36 Nm/litre
        Performance
        0-100km/h: 9 s
        Kilometre: 31.70s
        Top speed: 202 km/h
        Power to weight: 91.28 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.60 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.MultiLi.LW.CS.ARB.
        Brakes: VeDi/Di-S-ABS
        Transmission: 6M
        Drive: FWD
        Top gear ratio: 0.61
        Final drive ratio: 3.56

        Alfa Romeo 166 2.5 V6 24V Sporttronic 1998

        Dimensions
        Wheelbase: 2700 mm
        Track front: 1545 mm
        Track rear: 1532 mm
        Length: 4720 mm
        Width: 1815 mm
        Kerb weight: 1520 kg
        Fuel capacity: 72 l
        Engine
        Manufacturer: Alfa Romeo
        Type: V-6
        in 60° vee
        Wet sumped
        DOHC
        24 valves total
        4 valves per cylinder
        Bore x stroke: 88.00mm Ч 68.30mm
        Bore / stroke ratio: 1.29
        Displacement: 2492 cc 152.07 cu in
        Compression: 10.30:1
        Fuel system: Bo Motronic ME2.1 fuel inj.
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 192.6 PS (190.0 bhp) (141.7 kW)@6200 rpm
        Max. torque: 222.0 Nm (164 lbft) (22.6 kgm)@5000 rpm
        Coolant: Water
        Specific output: 76.2 bhp/litre
        Specific torque: 89.09 Nm/litre
        Performance
        0-100km/h: 9 s
        Kilometre: 30.00s
        Top speed: 220 km/h
        Power to weight: 125 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.60 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.MultiLi.LW.CS.ARB.
        Tyres front: 205/55 WR 16
        Tyres rear: 205/55 WR 16
        Brakes: VeDi/Di-S-ABS
        Brake diametre: 308/276 mm
        Transmission: 4A
        Drive: FWD
        Top gear ratio: 0.72
        Final drive ratio: 4.43

        Alfa Romeo 166 3.0 V6 24V Sporttronic 1998
        Dimensions
        Wheelbase: 2700 mm
        Track front: 1545 mm
        Track rear: 1532 mm
        Length: 4720 mm
        Width: 1815 mm
        Kerb weight: 1550 kg
        Fuel capacity: 72 l
        Engine
        Manufacturer: Alfa Romeo
        Type: V-6
        in 60° vee
        Wet sumped
        DOHC
        24 valves total
        4 valves per cylinder
        Bore x stroke: 93.00mm Ч 72.60mm
        Bore / stroke ratio: 1.28
        Displacement: 2959 cc 180.56 cu in
        Compression: 10.00:1
        Fuel system: Bo Motronic ME2.1 fuel inj.
        Aspiration: Normal
        Catalytic Converter: Y
        Max. output: 229.1 PS (226.0 bhp) (168.5 kW)@6200 rpm
        Max. torque: 275.0 Nm (203 lbft) (28 kgm)@5000 rpm
        Coolant: Water
        Specific output: 76.4 bhp/litre
        Specific torque: 92.94 Nm/litre
        Performance
        0-100km/h: 8.5 s
        Kilometre: 28.50s
        Top speed: 237 km/h
        Power to weight: 145.81 bhp/ton
        Chasis
        Engine location: Front
        Engine alignment: Transverse
        Steering: rack & pinion PAS
        Turning circle: 11.60 m
        Suspension front: I.DW.CS.ARB.
        Suspension rear: I.MultiLi.LW.CS.ARB.
        Tyres front: 205/55 WR 16
        Tyres rear: 205/55 WR 16
        Brakes: VeDi/Di-S-ABS
        Brake diametre: 308/276 mm
        Transmission: 4A
        Drive: FWD
        Top gear ratio: 0.72
        Final drive ratio: 4.22
        www.facebook.com/workshox

        Comment


        • #5
          Много изчерпателно инфо
          Но нещо не ми се струва много вярно
          За Алфа 155 2.0 8V пише, че е с SOCH /един вал/, а тя е с два
          За ускорението от 0-60 mph и на 2.0 8V и на 2.0 16V ги дават 9.3s. 0-100mph 8V е по-бърза от 16V Каквото и да е 16V е по-бърза и по-пъгава от 8V, макар и малко
          Другото, което ми направи впечатлени, е че предните дискове на 2.0 8V са 261мм Аз лятото ги сменях и моите са 284мм
          Все пак благодарности за инфото
          sigpic

          Comment


          • #6
            1999 - 2001

            За моделите от периода 1999 - 2001

            Alfa Romeo 145 1.4 16V TS 1999

            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4061 mm
            Width: 1712 mm
            Kerb weight: 1135 kg
            Fuel capacity: 51 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 64.87mm
            Bore / stroke ratio: 1.26
            Displacement: 1370 cc 83.60 cu in
            Compression: 10.50:1
            Fuel system: Bo Motronic M 1.5.5 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 103.4 PS (102.0 bhp) (76.1 kW)@6300 rpm
            Max. torque: 124.0 Nm (91 lbft) (12.6 kgm)@4600 rpm
            Coolant: Water
            Specific output: 74.5 bhp/litre
            Specific torque: 90.51 Nm/litre
            Performance
            0-100km/h: 11.2 s
            Kilometre: 32.80s
            Top speed: 185 km/h
            Fuel consumption: 10.7/6.3/5.9 l/100km urban/out of town/combined
            Power to weight: 89.87 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 10.50 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 185/60 HR 14
            Tyres rear: 185/60 HR 14
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 145 1.6 16V 1999
            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4061 mm
            Width: 1712 mm
            Kerb weight: 1165 kg
            Fuel capacity: 51 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 75.65mm
            Bore / stroke ratio: 1.08
            Displacement: 1598 cc 97.51 cu in
            Compression: 10.30:1
            Fuel system: Bo Motronic M 1.5.5 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 119.6 PS (118.0 bhp) (88 kW)@6300 rpm
            Max. torque: 144.0 Nm (106 lbft) (14.7 kgm)@4500 rpm
            Coolant: Water
            Specific output: 73.8 bhp/litre
            Specific torque: 90.11 Nm/litre
            Performance
            0-100km/h: 10.2 s
            Kilometre: 31.30s
            Top speed: 195 km/h
            Fuel consumption: 11.1/6.5/8.2 l/100km urban/out of town/combined
            Power to weight: 101.29 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 10.50 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 185/60 HR 14
            Tyres rear: 185/60 HR 14
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 145 1.8 16V TS 1999

            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4061 mm
            Width: 1712 mm
            Kerb weight: 1195 kg
            Fuel capacity: 61 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 82.75mm
            Bore / stroke ratio: 0.99
            Displacement: 1747 cc 106.60 cu in
            Compression: 10.70:1
            Fuel system: Bo Motronic M 1.5.5 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 144 PS (142.0 bhp) (105.9 kW)@6500 rpm
            Max. torque: 169.0 Nm (125 lbft) (17.2 kgm)@3500 rpm
            Coolant: Water
            Specific output: 81.3 bhp/litre
            Specific torque: 96.74 Nm/litre
            Performance
            0-100km/h: 9.1 s
            Kilometre: 30.00s
            Top speed: 207 km/h
            Fuel consumption: 11.5/6.5/8.4 l/100km urban/out of town/combined
            Power to weight: 118.83 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.00 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 195/55 VR 15
            Tyres rear: 195/55 VR 15
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 145 1.9 JTD 1999
            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4061 mm
            Width: 1712 mm
            Kerb weight: 1210 kg
            Fuel capacity: 61 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            SOHC
            8 valves total
            2 valves per cylinder
            Bore x stroke: 82.60mm Ч 90.00mm
            Bore / stroke ratio: 0.92
            Displacement: 1910 cc 116.55 cu in
            Compression: 19.20:1
            Fuel system: Direct diesel inj.
            Aspiration: Turbo D.
            Catalytic Converter: Y
            Max. output: 105.4 PS (104.0 bhp) (77.6 kW)@4000 rpm
            Max. torque: 255.0 Nm (188 lbft) (26 kgm)@2000 rpm
            Coolant: Water
            Specific output: 54.5 bhp/litre
            Specific torque: 133.51 Nm/litre
            Performance
            0-100km/h: 10.4 s
            Kilometre: 32.70s
            Top speed: 185 km/h
            Fuel consumption: 7.6/4.7/5.7 l/100km urban/out of town/combined
            Power to weight: 85.95 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 10.50 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 185/60 HR 14
            Tyres rear: 185/60 HR 14
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 146 1.4 16V TS 1999
            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4235 mm
            Width: 1712 mm
            Kerb weight: 1160 kg
            Fuel capacity: 51 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 64.87mm
            Bore / stroke ratio: 1.26
            Displacement: 1370 cc 83.60 cu in
            Compression: 10.50:1
            Fuel system: Bo Motronic M 1.5.5 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 103.4 PS (102.0 bhp) (76.1 kW)@6300 rpm
            Max. torque: 124.0 Nm (91 lbft) (12.6 kgm)@4600 rpm
            Coolant: Water
            Specific output: 74.5 bhp/litre
            Specific torque: 90.51 Nm/litre
            Performance
            0-100km/h: 11.5 s
            Kilometre: 33.00s
            Top speed: 187 km/h
            Fuel consumption: 10.7/6.3/7.9 l/100km urban/combined/mixed
            Power to weight: 87.93 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 10.50 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 185/60 HR 14
            Tyres rear: 185/60 HR 14
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 146 1.6 16V TS 1999
            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4235 mm
            Width: 1712 mm
            Kerb weight: 1190 kg
            Fuel capacity: 51 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 75.65mm
            Bore / stroke ratio: 1.08
            Displacement: 1598 cc 97.51 cu in
            Compression: 10.30:1
            Fuel system: Bo Motronic M 1.5.5 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 119.6 PS (118.0 bhp) (88 kW)@6300 rpm
            Max. torque: 144.0 Nm (106 lbft) (14.7 kgm)@4500 rpm
            Coolant: Water
            Specific output: 73.8 bhp/litre
            Specific torque: 90.11 Nm/litre
            Performance
            0-100km/h: 10.5 s
            Kilometre: 31.50s
            Top speed: 197 km/h
            Fuel consumption: 11.3/6.6/8.3 l/100km urban/combined/mixed
            Power to weight: 99.16 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 10.50 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 185/60 HR 14
            Tyres rear: 185/60 HR 14
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 146 1.8 16V TS 1999
            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4235 mm
            Width: 1712 mm
            Kerb weight: 1215 kg
            Fuel capacity: 61 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 82.75mm
            Bore / stroke ratio: 0.99
            Displacement: 1747 cc 106.60 cu in
            Compression: 10.70:1
            Fuel system: Bo Motronic M 1.5.5 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 144 PS (142.0 bhp) (105.9 kW)@6500 rpm
            Max. torque: 169.0 Nm (125 lbft) (17.2 kgm)@3500 rpm
            Coolant: Water
            Specific output: 81.3 bhp/litre
            Specific torque: 96.74 Nm/litre
            Performance
            0-100km/h: 9.3 s
            Kilometre: 30.20s
            Top speed: 209 km/h
            Fuel consumption: 11.5/6.6/8.4 l/100km urban/combined/mixed
            Power to weight: 116.87 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.00 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 195/55 VR 15
            Tyres rear: 195/55 VR 15
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 146 1.9 JTD 1999
            Dimensions
            Wheelbase: 2540 mm
            Track front: 1472 mm
            Track rear: 1441 mm
            Length: 4235 mm
            Width: 1712 mm
            Kerb weight: 1245 kg
            Fuel capacity: 61 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            SOHC
            8 valves total
            2 valves per cylinder
            Bore x stroke: 82.60mm Ч 90.00mm
            Bore / stroke ratio: 0.92
            Displacement: 1910 cc 116.55 cu in
            Compression: 19.20:1
            Fuel system: Direct diesel inj.
            Aspiration: Turbo D.
            Catalytic Converter: Y
            Max. output: 105.4 PS (104.0 bhp) (77.6 kW)@4000 rpm
            Max. torque: 255.0 Nm (188 lbft) (26 kgm)@2000 rpm
            Coolant: Water
            Specific output: 54.5 bhp/litre
            Specific torque: 133.51 Nm/litre
            Performance
            0-100km/h: 10.5 s
            Kilometre: 32.80s
            Top speed: 187 km/h
            Fuel consumption: 7.6/4.7/5.7 l/100km urban/combined/mixed
            Power to weight: 83.53 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 10.50 m
            Suspension front: I.MS.LW.CS.ARB.
            Suspension rear: I.TA.CS.ARB.
            Tyres front: 185/60 HR 14
            Tyres rear: 185/60 HR 14
            Brakes: VeDi/Di-S
            Brake diametre: 257/240 mm
            Transmission: 5M
            Drive: FWD

            Alfa Romeo Dardo 1999

            Dimensions
            Wheelbase: 2540 mm
            Track front: 1540 mm
            Track rear: 1560 mm
            Length: 4385 mm
            Width: 1795 mm
            Engine
            Manufacturer: Alfa Romeo
            Type: V-6
            in 60° vee
            DOHC
            24 valves total
            4 valves per cylinder
            Bore x stroke: 88.00mm Ч 68.30mm
            Bore / stroke ratio: 1.29
            Displacement: 2492 cc 152.07 cu in
            Compression: 10.30:1
            Fuel system: Bo Motronic ME2.1 MPi
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 189.6 PS (187.0 bhp) (139.4 kW)@6300 rpm
            Max. torque: 222.0 Nm (164 lbft) (22.6 kgm)@5000 rpm
            Coolant: Water
            Specific output: 75 bhp/litre
            Specific torque: 89.09 Nm/litre
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Tyres front: 225/40 ZR 18
            Tyres rear: 225/40 ZR 18
            Transmission: 5M
            Drive: FWD

            Alfa Romeo 147 1.6 16V TS 2000

            Dimensions
            Wheelbase: 2546 mm
            Track front: 1518 mm
            Track rear: 1502 mm
            Length: 4170 mm
            Width: 1729 mm
            Kerb weight: 1200 kg
            Fuel capacity: 60 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 75.65mm
            Bore / stroke ratio: 1.08
            Displacement: 1598 cc 97.51 cu in
            Compression: 10.30:1
            Fuel system: Bo Motronic ME.7 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 119.6 PS (118.0 bhp) (88 kW)@6200 rpm
            Max. torque: 146.0 Nm (108 lbft) (14.9 kgm)@4200 rpm
            Coolant: Water
            Specific output: 73.8 bhp/litre
            Specific torque: 91.36 Nm/litre
            Performance
            0-100km/h: 10.6 s
            Kilometre: 31.80s
            Top speed: 195 km/h
            Fuel consumption: 11.2/6.4/8.2 l/100km urban/extra-urban/combined
            CO2 emissions: 194 g/km
            Power to weight: 98.33 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.50 m
            Suspension front: I.DW.ARB.
            Suspension rear: I.MS.ARB.
            Tyres front: 185/65 HR 15
            Tyres rear: 186/65 HR 15
            Brakes: VeDi/Di-S
            Brake diametre: 284/251 mm
            Transmission: 5M
            Drive: FWD
            Top gear ratio: 0.92
            Final drive ratio: 4.07

            Alfa Romeo 147 1.9 JTD 2000

            Dimensions
            Wheelbase: 2546 mm
            Track front: 1518 mm
            Track rear: 1502 mm
            Length: 4170 mm
            Width: 1729 mm
            Kerb weight: 1270 kg
            Fuel capacity: 60 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            SOHC
            8 valves total
            2 valves per cylinder
            Bore x stroke: 82.00mm Ч 90.40mm
            Bore / stroke ratio: 0.91
            Displacement: 1910 cc 116.55 cu in
            Compression: 18.50:1
            Fuel system: Common rail diesel inj.
            Aspiration: Turbo D.
            Catalytic Converter: Y
            Max. output: 111.5 PS (110.0 bhp) (82 kW)@4000 rpm
            Max. torque: 275.0 Nm (203 lbft) (28 kgm)@2000 rpm
            Coolant: Water
            Specific output: 57.6 bhp/litre
            Specific torque: 143.98 Nm/litre
            Performance
            0-100km/h: 10.5 s
            Kilometre: 33.00s
            Top speed: 189 km/h
            CO2 emissions: 152 g/km
            Power to weight: 86.61 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.50 m
            Suspension front: I.DW.ARB.
            Suspension rear: I.MS.ARB.
            Tyres front: 185/65 HR 15
            Tyres rear: 185/65 HR 15
            Brakes: VeDi/Di-S
            Brake diametre: 284/251 mm
            Transmission: 5M
            Drive: FWD
            Top gear ratio: 0.76
            Final drive ratio: 3.35

            Alfa Romeo 147 2.0 16V TS Selespeed 2000
            Dimensions
            Wheelbase: 2546 mm
            Track front: 1509 mm
            Track rear: 1494 mm
            Length: 4170 mm
            Width: 1729 mm
            Kerb weight: 1250 kg
            Fuel capacity: 60 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            Wet sumped
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 83.00mm Ч 91.00mm
            Bore / stroke ratio: 0.91
            Displacement: 1970 cc 120.21 cu in
            Compression: 10.00:1
            Fuel system: Bo Motronic ME.7 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 149 PS (147.0 bhp) (109.6 kW)@6300 rpm
            Max. torque: 181.0 Nm (133 lbft) (18.5 kgm)@3800 rpm
            Coolant: Water
            Specific output: 74.6 bhp/litre
            Specific torque: 91.88 Nm/litre
            Performance
            0-100km/h: 9.3 s
            Kilometre: 30.20s
            Top speed: 208 km/h
            Fuel consumption: 12.1/7.0/8.9 l/100km urban/extra-urban/combined
            CO2 emissions: 211 g/km
            Power to weight: 117.6 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.50 m
            Suspension front: I.DW.ARB.
            Suspension rear: I.MS.ARB.
            Tyres front: 205/55 WR 16
            Tyres rear: 205/55 WR 16
            Brakes: VeDi/Di-S
            Brake diametre: 284/251 mm
            Transmission: 5M
            Drive: FWD
            Top gear ratio: 0.92
            Final drive ratio: 3.87

            Alfa Romeo 156 Sportwagon 1.6 16V TS 2000
            Dimensions
            Wheelbase: 2595 mm
            Track front: 1519 mm
            Track rear: 1506 mm
            Length: 4430 mm
            Width: 1745 mm
            Kerb weight: 1280 kg
            Fuel capacity: 63 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 75.65mm
            Bore / stroke ratio: 1.08
            Displacement: 1598 cc 97.51 cu in
            Compression: 10.30:1
            Fuel system: Bo Motronic M 1.5.5 fuel inj.
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 121.7 PS (120.0 bhp) (89.5 kW)@6300 rpm
            Max. torque: 144.0 Nm (106 lbft) (14.7 kgm)@4500 rpm
            Coolant: Water
            Specific output: 75.1 bhp/litre
            Specific torque: 90.11 Nm/litre
            Performance
            0-100km/h: 11 s
            Kilometre: 32.30s
            Top speed: 200 km/h
            Power to weight: 93.75 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.10 m
            Suspension front: I.DW.TA.ARB.
            Suspension rear: I.MS.ARB.
            Brakes: Di/Di
            Transmission: 5M
            Drive: FWD
            Top gear ratio: 0.95
            Final drive ratio: 3.73

            Alfa Romeo 156 Sportwagon 1.8 16V TS 2000
            Dimensions
            Wheelbase: 2595 mm
            Track front: 1511 mm
            Track rear: 1498 mm
            Length: 4430 mm
            Width: 1745 mm
            Kerb weight: 1280 kg
            Fuel capacity: 63 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-4
            DOHC
            16 valves total
            4 valves per cylinder
            Bore x stroke: 82.00mm Ч 82.70mm
            Bore / stroke ratio: 0.99
            Displacement: 1747 cc 106.60 cu in
            Compression: 10.30:1
            Fuel system: Bo Motronic M1.5.5 MPFi
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 146 PS (144.0 bhp) (107.4 kW)@6500 rpm
            Max. torque: 169.0 Nm (125 lbft) (17.2 kgm)@3500 rpm
            Coolant: Water
            Specific output: 82.4 bhp/litre
            Specific torque: 96.74 Nm/litre
            Performance
            0-100km/h: 9.6 s
            Kilometre: 30.80s
            Top speed: 210 km/h
            Power to weight: 112.5 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.10 m
            Suspension front: I.DW.TA.ARB.
            Suspension rear: I.MS.ARB.
            Brakes: Di/Di
            Transmission: 5M
            Drive: FWD
            Top gear ratio: 0.92
            Final drive ratio: 3.73

            Alfa Romeo 156 Sportwagon 2.4 JTD 2000
            Dimensions
            Wheelbase: 2595 mm
            Track front: 1519 mm
            Track rear: 1506 mm
            Length: 4430 mm
            Width: 1745 mm
            Kerb weight: 1400 kg
            Fuel capacity: 63 l
            Engine
            Manufacturer: Alfa Romeo
            Type: S-5
            SOHC
            10 valves total
            2 valves per cylinder
            Bore x stroke: 82.00mm Ч 90.40mm
            Bore / stroke ratio: 0.91
            Displacement: 2387 cc 145.66 cu in
            Compression: 18.45:1
            Fuel system: Bo EDC15 direct diesel inj.
            Aspiration: Turbo D.
            Intercooler: Y
            Catalytic Converter: Y
            Max. output: 137.9 PS (136.0 bhp) (101.4 kW)@4200 rpm
            Max. torque: 304.0 Nm (224 lbft) (31 kgm)@2000 rpm
            Coolant: Water
            Specific output: 57 bhp/litre
            Specific torque: 127.36 Nm/litre
            Performance
            0-100km/h: 9.9 s
            Kilometre: 30.90s
            Top speed: 203 km/h
            Power to weight: 97.14 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.60 m
            Suspension front: I.DW.TA.ARB.
            Suspension rear: I.MS.ARB.
            Brakes: Di/Di-S-ABS
            Transmission: 5M
            Drive: FWD
            Top gear ratio: 0.76
            Final drive ratio: 3.35

            Alfa Romeo 156 Sportwagon 2.5 Q-System 2000
            Dimensions
            Wheelbase: 2595 mm
            Track front: 1511 mm
            Track rear: 1498 mm
            Length: 4430 mm
            Width: 1745 mm
            Kerb weight: 1400 kg
            Fuel capacity: 63 l
            Engine
            Manufacturer: Alfa Romeo
            Type: V-6
            in 60° vee
            DOHC
            24 valves total
            4 valves per cylinder
            Bore x stroke: 88.00mm Ч 68.30mm
            Bore / stroke ratio: 1.29
            Displacement: 2492 cc 152.07 cu in
            Compression: 10.30:1
            Fuel system: EFi
            Aspiration: Normal
            Catalytic Converter: Y
            Max. output: 192.6 PS (190.0 bhp) (141.7 kW)@6300 rpm
            Max. torque: 222.0 Nm (164 lbft) (22.6 kgm)@5000 rpm
            Coolant: Water
            Specific output: 76.2 bhp/litre
            Specific torque: 89.09 Nm/litre
            Performance
            0-100km/h: 8.5 s
            Kilometre: 29.20s
            Top speed: 227 km/h
            Power to weight: 135.71 bhp/ton
            Chasis
            Engine location: Front
            Engine alignment: Transverse
            Steering: rack & pinion PAS
            Turning circle: 11.60 m
            Suspension front: I.DW.TA.ARB.
            Suspension rear: I.MS.ARB.
            Brakes: VeDi/Di-S-ABS
            Transmission: 4A
            Drive: FWD
            Top gear ratio: 1.06
            Final drive ratio: 2.86

            Alfa Romeo Centauri 2001

            Dimensions
            Wheelbase: 2400 mm
            Track front: 1560 mm
            Track rear: 1560 mm
            Length: 3680 mm
            Width: 1800 mm
            Engine
            Manufacturer: Alfa Romeo
            Type: V-6
            DOHC
            24 valves total
            4 valves per cylinder
            Bore x stroke: 93.00mm Ч 72.60mm
            Bore / stroke ratio: 1.28
            Displacement: 2959 cc 180.56 cu in
            Max. output:

            Max. torque:

            Coolant: Water
            Chasis
            Engine location: Front
            Engine alignment: Longitudinal
            Drive: RWD
            www.facebook.com/workshox

            Comment


            • #7
              2002

              За моделите от 2002

              Alfa Romeo 147 1.9 JTD 2002

              Dimensions
              Wheelbase: 2546 mm
              Track front: 1518 mm
              Track rear: 1502 mm
              Length: 4170 mm
              Width: 1729 mm
              Kerb weight: 1290 kg
              Fuel capacity: 60 l
              Engine
              Type: S-4
              DOHC
              16 valves total
              4 valves per cylinder
              Bore x stroke: 82.00mm Ч 90.40mm
              Bore / stroke ratio: 0.91
              Displacement: 1910 cc 116.55 cu in
              Compression: 18.00:1
              Fuel system: Bo EDC 16 direct diesel inj.
              Aspiration: Turbo D.
              Intercooler: Y
              Catalytic Converter: Y
              Max. output: 139.9 PS (138.0 bhp) (102.9 kW)@4000 rpm
              Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@2000 rpm
              Coolant: Water
              Specific output: 72.3 bhp/litre
              Specific torque: 159.69 Nm/litre
              Performance
              0-100km/h: 9.1 s
              Kilometre: 30.80s
              Top speed: 206 km/h
              Fuel consumption: 8.0/4.7/5.9 l/100km urban/extra-urban/combined
              CO2 emissions: 157 g/km
              Power to weight: 106.98 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.50 m
              Suspension front: I.DW.TA.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 185/65 HR 15
              Tyres rear: 158/65 HR 15
              Brake diametre: 284/251 mm
              Transmission: 6M
              Drive: FWD
              Top gear ratio: 0.61
              Final drive ratio: 3.56

              Alfa Romeo 156 1.6 16V TS 2002
              Dimensions
              Wheelbase: 2595 mm
              Track front: 1519 mm
              Track rear: 1506 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1265 kg
              Fuel capacity: 63 l
              Engine
              Manufacturer: Alfa Romeo
              Type: S-4
              DOHC
              16 valves total
              4 valves per cylinder
              Bore x stroke: 82.00mm Ч 75.65mm
              Bore / stroke ratio: 1.08
              Displacement: 1598 cc 97.51 cu in
              Compression: 10.30:1
              Fuel system: Bo Motronic ME7
              Aspiration: Normal
              Catalytic Converter: Y
              Max. output: 119.6 PS (118.0 bhp) (88 kW)@6200 rpm
              Max. torque: 146.0 Nm (108 lbft) (14.9 kgm)@4200 rpm
              Coolant: Water
              Specific output: 73.8 bhp/litre
              Specific torque: 91.36 Nm/litre
              Performance
              0-100km/h: 10.5 s
              Kilometre: 31.80s
              Top speed: 200 km/h
              CO2 emissions: 195 g/km
              Power to weight: 93.28 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.10 m
              Suspension front: I.DW.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 185/65 15
              Tyres rear: 185/65 15
              Brakes: Di/Di-S
              Brake diametre: 281/251 mm
              Transmission: 5M
              Drive: FWD
              Top gear ratio: 0.95
              Final drive ratio: 3.71

              Alfa Romeo 156 1.8 16V TS 2002
              Dimensions
              Wheelbase: 2595 mm
              Track front: 1519 mm
              Track rear: 1506 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1265 kg
              Fuel capacity: 63 l
              Engine
              Manufacturer: Alfa Romeo
              Type: S-4
              DOHC
              16 valves total
              4 valves per cylinder
              Bore x stroke: 82.00mm Ч 82.70mm
              Bore / stroke ratio: 0.99
              Displacement: 1747 cc 106.60 cu in
              Compression: 10.30:1
              Fuel system: Bo Motronic ME7
              Aspiration: Normal
              Catalytic Converter: Y
              Max. output: 139.9 PS (138.0 bhp) (102.9 kW)@6500 rpm
              Max. torque: 163.0 Nm (120 lbft) (16.6 kgm)@3900 rpm
              Coolant: Water
              Specific output: 79 bhp/litre
              Specific torque: 93.3 Nm/litre
              Performance
              0-100km/h: 9.4 s
              Kilometre: 30.70s
              Top speed: 208 km/h
              CO2 emissions: 202 g/km
              Power to weight: 109.09 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.10 m
              Suspension front: I.DW.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 185/65 15
              Tyres rear: 185/65 15
              Brakes: Di/Di-S
              Brake diametre: 281/251 mm
              Transmission: 5M
              Drive: FWD
              Top gear ratio: 0.92
              Final drive ratio: 3.73

              Alfa Romeo 156 1.9 JTD 2002
              Dimensions
              Wheelbase: 2595 mm
              Track front: 1519 mm
              Track rear: 1506 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1305 kg
              Fuel capacity: 63 l
              Engine
              Type: S-4
              DOHC
              16 valves total
              4 valves per cylinder
              Bore x stroke: 82.00mm Ч 90.40mm
              Bore / stroke ratio: 0.91
              Displacement: 1910 cc 116.55 cu in
              Compression: 18.00:1
              Fuel system: Bo EDC 16 direct diesel inj.
              Aspiration: Turbo D.
              Intercooler: Y
              Catalytic Converter: Y
              Max. output: 139.9 PS (138.0 bhp) (102.9 kW)@4000 rpm
              Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@2000 rpm
              Coolant: Water
              Specific output: 72.3 bhp/litre
              Specific torque: 159.69 Nm/litre
              Performance
              0-100km/h: 9.3 s
              Kilometre: 31.00s
              Top speed: 209 km/h
              Fuel consumption: 8.0/4.7/5.9 l/100km urban/extra-urban/combined
              CO2 emissions: 157 g/km
              Power to weight: 105.75 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.60 m
              Suspension front: I.DW.TA.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 185/65 HR 15
              Tyres rear: 158/65 HR 15
              Brake diametre: 281/276 mm
              Transmission: 6M
              Drive: FWD
              Top gear ratio: 0.61
              Final drive ratio: 3.56

              Alfa Romeo 156 2.0 JTS 2002

              Dimensions
              Wheelbase: 2595 mm
              Track front: 1511 mm
              Track rear: 1498 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1285 kg
              Fuel capacity: 63 l
              Engine
              Manufacturer: Alfa Romeo
              Type: S-4
              DOHC
              16 valves total
              4 valves per cylinder
              Bore x stroke: 83.00mm Ч 91.00mm
              Bore / stroke ratio: 0.91
              Displacement: 1970 cc 120.21 cu in
              Compression: 11.30:1
              Fuel system: Bo MED 7.1.1
              Aspiration: Normal
              Catalytic Converter: Y
              Max. output: 165.3 PS (163.0 bhp) (121.5 kW)@6400 rpm
              Max. torque: 206.0 Nm (152 lbft) (21 kgm)@3250 rpm
              Coolant: Water
              Specific output: 82.7 bhp/litre
              Specific torque: 104.57 Nm/litre
              Performance
              0-100km/h: 8.2 s
              Kilometre: 29.80s
              Top speed: 220 km/h
              CO2 emissions: 206 g/km
              Power to weight: 126.85 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.10 m
              Suspension front: I.DW.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 205/60 15
              Tyres rear: 205/60 15
              Brakes: VeDi/Di-S
              Brake diametre: 284/251 mm
              Transmission: 5M
              Drive: FWD
              Top gear ratio: 0.95
              Final drive ratio: 3.56

              Alfa Romeo 156 2.4 JTD 2002
              Dimensions
              Wheelbase: 2595 mm
              Track front: 1519 mm
              Track rear: 1506 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1385 kg
              Fuel capacity: 63 l
              Engine
              Manufacturer: Alfa Romeo
              Type: S-5
              SOHC
              10 valves total
              2 valves per cylinder
              Bore x stroke: 82.00mm Ч 90.40mm
              Bore / stroke ratio: 0.91
              Displacement: 2387 cc 145.66 cu in
              Compression: 18.45:1
              Fuel system: Direct diesel inj.
              Aspiration: Turbo D.
              Catalytic Converter: Y
              Max. output: 150.1 PS (148.0 bhp) (110.4 kW)@4000 rpm
              Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@1800 rpm
              Coolant: Water
              Specific output: 62 bhp/litre
              Specific torque: 127.78 Nm/litre
              Performance
              0-100km/h: 9.4 s
              Kilometre: 30.50s
              Top speed: 212 km/h
              CO2 emissions: 175 g/km
              Power to weight: 106.86 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.10 m
              Suspension front: I.DW.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 205/60 15
              Tyres rear: 205/60 15
              Brakes: VeDi/Di-S
              Brake diametre: 284/251 mm
              Transmission: 5M
              Drive: FWD
              Top gear ratio: 0.71
              Final drive ratio: 3.35

              Alfa Romeo 156 2.5 V6 24V 2002
              Dimensions
              Wheelbase: 2595 mm
              Track front: 1511 mm
              Track rear: 1498 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1355 kg
              Fuel capacity: 63 l
              Engine
              Manufacturer: Alfa Romeo
              Type: V-6
              in 60° vee
              DOHC
              24 valves total
              4 valves per cylinder
              Bore x stroke: 88.00mm Ч 68.30mm
              Bore / stroke ratio: 1.29
              Displacement: 2492 cc 152.07 cu in
              Compression: 10.30:1
              Fuel system: Bo Motronic ME 3.1
              Aspiration: Normal
              Catalytic Converter: Y
              Max. output: 191.6 PS (189.0 bhp) (140.9 kW)@6300 rpm
              Max. torque: 218.0 Nm (161 lbft) (22.2 kgm)@5000 rpm
              Coolant: Water
              Specific output: 75.8 bhp/litre
              Specific torque: 87.48 Nm/litre
              Performance
              0-100km/h: 7.3 s
              Kilometre: 27.80s
              Top speed: 230 km/h
              CO2 emissions: 282 g/km
              Power to weight: 139.48 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.60 m
              Suspension front: I.DW.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 205/60 15
              Tyres rear: 205/60 15
              Brakes: VeDi/Di-S
              Brake diametre: 284/251 mm
              Transmission: 6M
              Drive: FWD
              Top gear ratio: 0.81
              Final drive ratio: 3.94

              Alfa Romeo 156 2.5 V6 Q-System 2002
              Dimensions
              Wheelbase: 2595 mm
              Track front: 1511 mm
              Track rear: 1498 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1385 kg
              Fuel capacity: 63 l
              Engine
              Manufacturer: Alfa Romeo
              Type: V-6
              in 60° vee
              DOHC
              24 valves total
              4 valves per cylinder
              Bore x stroke: 88.00mm Ч 68.30mm
              Bore / stroke ratio: 1.29
              Displacement: 2492 cc 152.07 cu in
              Compression: 10.30:1
              Fuel system: Bo Motronic ME 3.1
              Aspiration: Normal
              Catalytic Converter: Y
              Max. output: 191.6 PS (189.0 bhp) (140.9 kW)@6300 rpm
              Max. torque: 218.0 Nm (161 lbft) (22.2 kgm)@5000 rpm
              Coolant: Water
              Specific output: 75.8 bhp/litre
              Specific torque: 87.48 Nm/litre
              Performance
              0-100km/h: 8.5 s
              Kilometre: 29.00s
              Top speed: 227 km/h
              CO2 emissions: 291 g/km
              Power to weight: 136.46 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.60 m
              Suspension front: I.DW.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 205/60 15
              Tyres rear: 205/60 15
              Brakes: VeDi/Di-S
              Brake diametre: 284/251 mm
              Transmission: 4A
              Drive: FWD
              Top gear ratio: 1.06
              Final drive ratio: 2.86

              Alfa Romeo 156 Sportwagon 2.4 JTD 2002
              Dimensions
              Wheelbase: 2595 mm
              Track front: 1519 mm
              Track rear: 1506 mm
              Length: 4430 mm
              Width: 1745 mm
              Kerb weight: 1435 kg
              Fuel capacity: 63 l
              Engine
              Manufacturer: Alfa Romeo
              Type: S-5
              SOHC
              10 valves total
              2 valves per cylinder
              Bore x stroke: 82.00mm Ч 90.40mm
              Bore / stroke ratio: 0.91
              Displacement: 2387 cc 145.66 cu in
              Compression: 18.45:1
              Fuel system: Direct diesel inj.
              Aspiration: Turbo D.
              Catalytic Converter: Y
              Max. output: 150.1 PS (148.0 bhp) (110.4 kW)@4000 rpm
              Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@1800 rpm
              Coolant: Water
              Specific output: 62 bhp/litre
              Specific torque: 127.78 Nm/litre
              Performance
              0-100km/h: 9.4 s
              Kilometre: 30.50s
              Top speed: 212 km/h
              CO2 emissions: 178 g/km
              Power to weight: 103.14 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Turning circle: 11.10 m
              Suspension front: I.DW.ARB.
              Suspension rear: I.MS.ARB.
              Tyres front: 205/60 15
              Tyres rear: 205/60 15
              Brakes: VeDi/Di-S
              Brake diametre: 284/251 mm
              Transmission: 5M
              Drive: FWD
              Top gear ratio: 0.71
              Final drive ratio: 3.35

              Alfa Romeo 166 2.4 JTD 2002
              Dimensions
              Wheelbase: 2700 mm
              Track front: 1545 mm
              Track rear: 1532 mm
              Length: 4720 mm
              Width: 1815 mm
              Kerb weight: 1565 kg
              Fuel capacity: 72 l
              Engine
              Type: S-5
              Wet sumped
              SOHC
              10 valves total
              2 valves per cylinder
              Bore x stroke: 82.00mm Ч 90.40mm
              Bore / stroke ratio: 0.91
              Displacement: 2387 cc 145.66 cu in
              Compression: 18.50:1
              Aspiration: Turbo D.
              Compressor type: 1 Garrett VNT 25 turbo
              Intercooler: Y
              Catalytic Converter: Y
              Max. output: 149 PS (147.0 bhp) (109.6 kW)@4000 rpm
              Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@1800 rpm
              Coolant: Water
              Specific output: 61.6 bhp/litre
              Specific torque: 127.78 Nm/litre
              Performance
              0-100km/h: 9.9 s
              Kilometre: 31.20s
              Top speed: 210 km/h
              Fuel consumption: 10.4/5.8/7.5 l/100km urban/extra-urban/combined
              CO2 emissions: 199 g/km
              Power to weight: 93.93 bhp/ton
              Chasis
              Engine location: Front
              Engine alignment: Transverse
              Steering: rack & pinion PAS
              Suspension front: I.DW.CS.ARB.
              Suspension rear: I.MultiLi.LW.CS.ARB.
              Wheels F/R: 6.5J x 16-41/6.5J x 16-41
              Tyres front: 205/55 R 16 91W
              Tyres rear: 205/55 R 16 91W
              Brakes: VeDi/Di-S-ABS
              Drive: FWD
              www.facebook.com/workshox

              Comment


              • #8
                2003 - 2004

                За моделите от периода 2003 - 2004

                Alfa Romeo 156 1.9 JTD Multijet 2003
                Bodywork
                Type: 4/5S SAL
                Designer: Giugiaro
                Number of doors: 4
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1519 mm
                Track rear: 1506 mm
                Length: 4435 mm
                Width: 1743 mm
                Kerb weight: 1305 kg
                Fuel capacity: 63 l
                Engine
                Type: S-4
                DOHC
                16 valves total
                4 valves per cylinder
                Bore x stroke: 82.00mm Ч 90.40mm
                Bore / stroke ratio: 0.91
                Displacement: 1910 cc 116.55 cu in
                Compression: 18.45:1
                Fuel system: Multijet direct diesel inj.
                Aspiration: Turbo D.
                Compressor type: Variable geometry turbocharger
                Intercooler: Y
                Catalytic Converter: Y
                Max. output: 139.9 PS (138.0 bhp) (102.9 kW)@4000 rpm
                Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@2000 rpm
                Coolant: Water
                Specific output: 72.3 bhp/litre
                Specific torque: 159.69 Nm/litre
                Performance
                0-100km/h: 9.3 s
                Kilometre: 31.00s
                Top speed: 209 km/h
                Fuel consumption: 8.0/4.7/5.9 l/100km urban/extra-urban/combined
                CO2 emissions: 157 g/km
                Power to weight: 105.75 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Turning circle: 11.60 m
                Suspension front: I.DW.ARB.
                Suspension rear: I.MS.ARB.
                Tyres front: 185/65 HR 15
                Tyres rear: 185/65 HR 15
                Brakes: VeDi/Di-S
                Brake diametre: 281/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.64
                Final drive ratio: 3.56

                Alfa Romeo 156 2.0 JTS 2003
                Bodywork
                Type: 4/5S SAL
                Designer: Giugiaro
                Number of doors: 4
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1511 mm
                Track rear: 1498 mm
                Length: 4435 mm
                Width: 1743 mm
                Kerb weight: 1285 kg
                Fuel capacity: 63 l
                Engine
                Manufacturer: Alfa Romeo
                Type: S-4
                DOHC
                16 valves total
                4 valves per cylinder
                Bore x stroke: 83.00mm Ч 91.00mm
                Bore / stroke ratio: 0.91
                Displacement: 1970 cc 120.21 cu in
                Compression: 11.30:1
                Fuel system: Bo MED 7.1.1 MPFi
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 164.3 PS (162.0 bhp) (120.8 kW)@6400 rpm
                Max. torque: 206.0 Nm (152 lbft) (21 kgm)@3250 rpm
                Coolant: Water
                Specific output: 82.2 bhp/litre
                Specific torque: 104.57 Nm/litre
                Performance
                0-100km/h: 8.2 s
                Kilometre: 29.80s
                Top speed: 220 km/h
                Fuel consumption: 12.2/6.6/8.6 l/100km urban/extra-urban/combined
                CO2 emissions: 205 g/km
                Power to weight: 126.07 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Turning circle: 11.10 m
                Suspension front: I.DW.ARB.
                Suspension rear: I.MS.ARB.
                Tyres front: 205/60 15
                Tyres rear: 205/60 15
                Brakes: VeDi/Di-S
                Brake diametre: 284/276 mm
                Transmission: 5M
                Drive: FWD
                Top gear ratio: 0.95
                Final drive ratio: 3.73

                Alfa Romeo 156 2.4 JTD Multijet 2003

                Bodywork
                Type: 4/5S SAL
                Designer: Giugiaro
                Number of doors: 4
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1511 mm
                Track rear: 1498 mm
                Length: 4435 mm
                Width: 1743 mm
                Kerb weight: 1385 kg
                Fuel capacity: 63 l
                Engine
                Manufacturer: Fiat
                Type: S-5
                DOHC
                20 valves total
                4 valves per cylinder
                Bore x stroke: 82.00mm Ч 90.40mm
                Bore / stroke ratio: 0.91
                Displacement: 2387 cc 145.66 cu in
                Compression: 18.45:1
                Fuel system: Multijet direct diesel inj.
                Aspiration: Turbo D.
                Compressor type: Variable geometry turbocharger
                Intercooler: Y
                Catalytic Converter: Y
                Max. output: 174.4 PS (172.0 bhp) (128.3 kW)@4000 rpm
                Max. torque: 385.0 Nm (284 lbft) (39.3 kgm)@2000 rpm
                Coolant: Water
                Specific output: 72.1 bhp/litre
                Specific torque: 161.29 Nm/litre
                Performance
                0-60mph: 7.6 s
                0-100km/h: 8.3 s
                0-100mph: 20.4 s
                Quarter mile: 16.40s @ 90.00 mph
                Kilometre: 29.10s @ 183.00 km/h
                Top speed: 216 km/h
                Fuel consumption: 8.8/5.3/6.6 l/100km urban/extra-urban/combined
                CO2 emissions: 175 g/km
                Power to weight: 124.19 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Turning circle: 11.60 m
                Suspension front: I.DW.ARB.
                Suspension rear: I.MS.ARB.
                Wheels F/R: 6.5J x 16/6.5J x 16
                Tyres front: 205/60 15
                Tyres rear: 205/60 15
                Brakes: VeDi/Di-S
                Brake diametre: 284/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.62
                Final drive ratio: 3.55

                Alfa Romeo 156 2.5 V6 24V 2003
                Bodywork
                Type: 4/5S SAL
                Designer: Giugiaro
                Number of doors: 4
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1511 mm
                Track rear: 1498 mm
                Length: 4435 mm
                Width: 1743 mm
                Kerb weight: 1405 kg
                Fuel capacity: 63 l
                Engine
                Manufacturer: Alfa Romeo
                Type: V-6
                in 60° vee
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 88.00mm Ч 68.30mm
                Bore / stroke ratio: 1.29
                Displacement: 2492 cc 152.07 cu in
                Compression: 10.30:1
                Fuel system: Bo Motronic ME 3.1 MPi
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 191.6 PS (189.0 bhp) (140.9 kW)@6300 rpm
                Max. torque: 218.0 Nm (161 lbft) (22.2 kgm)@5000 rpm
                Coolant: Water
                Specific output: 75.8 bhp/litre
                Specific torque: 87.48 Nm/litre
                Performance
                0-100km/h: 7.3 s
                Kilometre: 27.80s
                Top speed: 230 km/h
                Fuel consumption: 17.5/8.5/11.8 l/100km urban/extra-urban/combined
                CO2 emissions: 282 g/km
                Power to weight: 134.52 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Turning circle: 11.60 m
                Suspension front: I.DW.ARB.
                Suspension rear: I.MS.ARB.
                Tyres front: 205/60 15
                Tyres rear: 205/60 15
                Brakes: VeDi/Di-S
                Brake diametre: 284/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.81
                Final drive ratio: 3.94

                Alfa Romeo 156 Sportwagon 1.9 JTD Multijet 2003
                Bodywork
                Type: 4/5S EST
                Designer: Giugiaro
                Number of doors: 5
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1519 mm
                Track rear: 1506 mm
                Length: 4441 mm
                Width: 1743 mm
                Kerb weight: 1355 kg
                Fuel capacity: 63 l
                Engine
                Type: S-4
                DOHC
                16 valves total
                4 valves per cylinder
                Bore x stroke: 82.00mm Ч 90.40mm
                Bore / stroke ratio: 0.91
                Displacement: 1910 cc 116.55 cu in
                Compression: 18.45:1
                Fuel system: Multijet direct diesel inj.
                Aspiration: Turbo D.
                Compressor type: Variable geometry turbocharger
                Intercooler: Y
                Catalytic Converter: Y
                Max. output: 139.9 PS (138.0 bhp) (102.9 kW)@4000 rpm
                Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@2000 rpm
                Coolant: Water
                Specific output: 72.3 bhp/litre
                Specific torque: 159.69 Nm/litre
                Performance
                0-100km/h: 9.7 s
                Kilometre: 31.30s
                Top speed: 209 km/h
                Fuel consumption: 8.2/4.8/6.1 l/100km urban/extra-urban/combined
                CO2 emissions: 161 g/km
                Power to weight: 101.85 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Turning circle: 11.60 m
                Suspension front: I.DW.ARB.
                Suspension rear: I.MS.ARB.
                Tyres front: 185/65 HR 15
                Tyres rear: 185/65 HR 15
                Brakes: VeDi/Di-S
                Brake diametre: 281/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.64
                Final drive ratio: 3.56

                Alfa Romeo 156 Sportwagon 2.4 JTD Multijet 2003
                Bodywork
                Type: 4/5S EST
                Designer: Giugiaro
                Number of doors: 5
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1511 mm
                Track rear: 1498 mm
                Length: 4441 mm
                Width: 1743 mm
                Kerb weight: 1435 kg
                Fuel capacity: 63 l
                Engine
                Type: S-5
                DOHC
                20 valves total
                4 valves per cylinder
                Bore x stroke: 82.00mm Ч 90.40mm
                Bore / stroke ratio: 0.91
                Displacement: 2387 cc 145.66 cu in
                Compression: 18.45:1
                Fuel system: Multijet direct diesel inj.
                Aspiration: Turbo D.
                Compressor type: Variable geometry turbocharger
                Intercooler: Y
                Catalytic Converter: Y
                Max. output: 174.4 PS (172.0 bhp) (128.3 kW)@4000 rpm
                Max. torque: 385.0 Nm (284 lbft) (39.3 kgm)@2000 rpm
                Coolant: Water
                Specific output: 72.1 bhp/litre
                Specific torque: 161.29 Nm/litre
                Performance
                0-100km/h: 8.6 s
                Kilometre: 29.40s
                Top speed: 225 km/h
                Fuel consumption: 8.9/5.5/6.7 l/100km urban/extra-urban/combined
                CO2 emissions: 178 g/km
                Power to weight: 119.86 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Turning circle: 11.60 m
                Suspension front: I.DW.ARB.
                Suspension rear: I.MS.ARB.
                Tyres front: 205/60 15
                Tyres rear: 205/60 15
                Brakes: VeDi/Di-S
                Brake diametre: 284/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.62
                Final drive ratio: 3.55

                Alfa Romeo 156 Sportwagon 2.5 V6 Q-System 2003
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1511 mm
                Track rear: 1498 mm
                Length: 4441 mm
                Width: 1743 mm
                Kerb weight: 1435 kg
                Fuel capacity: 63 l
                Engine
                Manufacturer: Alfa Romeo
                Type: V-6
                in 60° vee
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 88.00mm Ч 68.30mm
                Bore / stroke ratio: 1.29
                Displacement: 2492 cc 152.07 cu in
                Compression: 10.30:1
                Fuel system: Bo Motronic ME 3.1 MPi
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 191.6 PS (189.0 bhp) (140.9 kW)@6300 rpm
                Max. torque: 218.0 Nm (161 lbft) (22.2 kgm)@5000 rpm
                Coolant: Water
                Specific output: 75.8 bhp/litre
                Specific torque: 87.48 Nm/litre
                Performance
                0-100km/h: 8.5 s
                Kilometre: 29.00s
                Top speed: 227 km/h
                Fuel consumption: 17.5/8.6/11.9 l/100km urban/extra-urban/combined
                CO2 emissions: 291 g/km
                Power to weight: 131.71 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Turning circle: 11.60 m
                Suspension front: I.DW.ARB.
                Suspension rear: I.MS.ARB.
                Tyres front: 205/60 15
                Tyres rear: 205/60 15
                Brakes: VeDi/Di-S
                Brake diametre: 284/276 mm
                Transmission: 4A
                Drive: FWD
                Top gear ratio: 1.06
                Final drive ratio: 2.86

                Alfa Romeo 166 2.4 JTD 20V Multijet 2003
                Dimensions
                Wheelbase: 2700 mm
                Track front: 1554 mm
                Track rear: 1542 mm
                Length: 4720 mm
                Width: 1800 mm
                Kerb weight: 1540 kg
                Weight distribution F/R: 60.1 %
                Fuel capacity: 69 l
                Engine
                Manufacturer: Alfa Romeo
                Type: S-5
                Wet sumped
                DOHC
                20 valves total
                4 valves per cylinder
                Bore x stroke: 82.00mm Ч 90.40mm
                Bore / stroke ratio: 0.91
                Displacement: 2387 cc 145.66 cu in
                Compression: 18.00:1
                Fuel system: direct diesel inj.
                Aspiration: Turbo D.
                Intercooler: Y
                Catalytic Converter: Y
                Max. output: 174.4 PS (172.0 bhp) (128.3 kW)@4000 rpm
                Max. torque: 385.0 Nm (284 lbft) (39.3 kgm)@2000 rpm
                Coolant: Water
                Specific output: 72.1 bhp/litre
                Specific torque: 161.29 Nm/litre
                Performance
                0-100km/h: 8.9 s
                Kilometre: 29.00s
                Top speed: 222 km/h
                Fuel consumption: 9.9/6.1/7.5 l/100km urban/extra-urban/combined
                CO2 emissions: 198 g/km
                Power to weight: 111.69 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.CS.ARB.
                Suspension rear: I.MultiLi.LW.CS.ARB.
                Wheels F/R: 6.5J x 16/6.5J x 16
                Tyres front: 205/55 16
                Tyres rear: 205/55 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 310/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.61
                Final drive ratio: 3.56

                Alfa Romeo 166 2.4 20V CAE 2003
                Dimensions
                Wheelbase: 2700 mm
                Track front: 1554 mm
                Track rear: 1542 mm
                Length: 4720 mm
                Width: 1800 mm
                Kerb weight: 1580 kg
                Weight distribution F/R: 60.8 %
                Fuel capacity: 69 l
                Engine
                Manufacturer: Alfa Romeo
                Type: S-5
                Wet sumped
                DOHC
                20 valves total
                4 valves per cylinder
                Bore x stroke: 82.00mm Ч 90.40mm
                Bore / stroke ratio: 0.91
                Displacement: 2387 cc 145.66 cu in
                Compression: 18.00:1
                Fuel system: direct diesel inj.
                Aspiration: Turbo D.
                Intercooler: Y
                Catalytic Converter: Y
                Max. output: 174.4 PS (172.0 bhp) (128.3 kW)@4000 rpm
                Max. torque: 330.0 Nm (243 lbft) (33.7 kgm)@1750 rpm
                Coolant: Water
                Specific output: 72.1 bhp/litre
                Specific torque: 138.25 Nm/litre
                Performance
                0-100km/h: 8.9 s
                Kilometre: 30.00s
                Top speed: 218 km/h
                Fuel consumption: 12.1/6.9/8.9 l/100km urban/extra-urban/combined
                CO2 emissions: 235 g/km
                Power to weight: 108.86 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.CS.ARB.
                Suspension rear: I.MultiLi.LW.CS.ARB.
                Wheels F/R: 6.5J x 16/6.5J x 16
                Tyres front: 205/55 16
                Tyres rear: 205/55 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 310/276 mm
                Transmission: 5A
                Drive: FWD
                Top gear ratio: 1
                Final drive ratio: 2.44

                Alfa Romeo 166 2.5 V6 24V 2003

                Bodywork
                Type: 4/5S SAL
                Number of doors: 4
                Dimensions
                Wheelbase: 2700 mm
                Track front: 1554 mm
                Track rear: 1542 mm
                Length: 4720 mm
                Width: 1800 mm
                Kerb weight: 1490 kg
                Weight distribution F/R: 59.7 %
                Fuel capacity: 69 l
                Engine
                Manufacturer: Alfa Romeo
                Type: V-6
                in 60° vee
                Wet sumped
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 88.00mm Ч 68.30mm
                Bore / stroke ratio: 1.29
                Displacement: 2492 cc 152.07 cu in
                Compression: 10.30:1
                Fuel system: Bo Motronic M2.1 fuel inj.
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 187.6 PS (185.0 bhp) (138 kW)@6300 rpm
                Max. torque: 221.0 Nm (163 lbft) (22.5 kgm)@5000 rpm
                Coolant: Water
                Specific output: 74.2 bhp/litre
                Specific torque: 88.68 Nm/litre
                Performance
                0-100km/h: 8.4 s
                Kilometre: 28.60s
                Top speed: 225 km/h
                Fuel consumption: 17.2/8.8/11.9 l/100km urban/extra-urban/combined
                CO2 emissions: 284 g/km
                Power to weight: 124.16 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.CS.ARB.
                Suspension rear: I.MultiLi.LW.CS.ARB.
                Wheels F/R: 6.5J x 16/6.5J x 16
                Tyres front: 205/55 16
                Tyres rear: 205/55 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 310/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.81
                Final drive ratio: 3.94

                Alfa Romeo 166 3.2 V6 24V 2003

                Bodywork
                Type: 4/5S SAL
                Number of doors: 4
                Dimensions
                Wheelbase: 2700 mm
                Track front: 1554 mm
                Track rear: 1542 mm
                Length: 4720 mm
                Width: 1800 mm
                Kerb weight: 1540 kg
                Weight distribution F/R: 60.1 %
                Fuel capacity: 69 l
                Engine
                Manufacturer: Alfa Romeo
                Type: V-6
                in 60° vee
                Wet sumped
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 93.00mm Ч 78.00mm
                Bore / stroke ratio: 1.19
                Displacement: 3179 cc 193.99 cu in
                Compression: 10.50:1
                Fuel system: Bo Motronic ME7 fuel inj.
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 239.3 PS (236.0 bhp) (176 kW)@6200 rpm
                Max. torque: 289.0 Nm (213 lbft) (29.5 kgm)@4800 rpm
                Coolant: Water
                Specific output: 74.2 bhp/litre
                Specific torque: 90.91 Nm/litre
                Performance
                0-100km/h: 7.4 s
                Kilometre: 27.50s
                Top speed: 245 km/h
                Fuel consumption: 18.3/9.1/12.5 l/100km urban/extra-urban/combined
                CO2 emissions: 297 g/km
                Power to weight: 153.25 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.CS.ARB.
                Suspension rear: I.MultiLi.LW.CS.ARB.
                Wheels F/R: 6.5J x 16/6.5J x 16
                Tyres front: 205/55 16
                Tyres rear: 205/55 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 310/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.82
                Final drive ratio: 3.73

                Alfa Romeo 166 3.0 V6 24V CAE 2003
                Dimensions
                Wheelbase: 2700 mm
                Track front: 1554 mm
                Track rear: 1542 mm
                Length: 4720 mm
                Width: 1800 mm
                Kerb weight: 1550 kg
                Weight distribution F/R: 60.6 %
                Fuel capacity: 69 l
                Engine
                Manufacturer: Alfa Romeo
                Type: V-6
                in 60° vee
                Wet sumped
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 93.00mm Ч 72.60mm
                Bore / stroke ratio: 1.28
                Displacement: 2959 cc 180.56 cu in
                Compression: 10.00:1
                Fuel system: Bo Motronic ME2.1 fuel inj.
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 219 PS (216.0 bhp) (161.1 kW)@6300 rpm
                Max. torque: 265.0 Nm (195 lbft) (27 kgm)@5000 rpm
                Coolant: Water
                Specific output: 73 bhp/litre
                Specific torque: 89.56 Nm/litre
                Performance
                0-100km/h: 8.6 s
                Kilometre: 28.50s
                Top speed: 236 km/h
                Fuel consumption: 19.4/9.3/13.0 l/100km urban/extra-urban/combined
                CO2 emissions: 310 g/km
                Power to weight: 139.35 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.CS.ARB.
                Suspension rear: I.MultiLi.LW.CS.ARB.
                Wheels F/R: 6.5J x 16/6.5J x 16
                Tyres front: 205/55 16
                Tyres rear: 205/55 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 310/276 mm
                Transmission: 4A
                Drive: FWD
                Top gear ratio: 0.72
                Final drive ratio: 4.22

                Alfa Romeo 8c Competizione 2003

                Bodywork
                Type: 2S FHC
                Designer: Alfa Romeo
                Number of doors: 2
                Dimensions
                Wheelbase: 2595 mm
                Track front: 1610 mm
                Track rear: 1580 mm
                Length: 4278 mm
                Width: 1900 mm
                Kerb weight: 1500 kg
                Fuel capacity: 90 l
                Engine
                Manufacturer: Maserati
                Type: V-8
                in 90° vee
                Dry sumped
                DOHC
                32 valves total
                4 valves per cylinder
                Bore x stroke: 92.00mm Ч 79.80mm
                Bore / stroke ratio: 1.15
                Displacement: 4244 cc 258.98 cu in
                Aspiration: S/Charged
                Catalytic Converter: Y
                Max. output: 405.6 PS (400.0 bhp) (298.3 kW)@7000 rpm
                Max. torque: 441.0 Nm (325 lbft) (45 kgm)@4500 rpm
                Coolant: Water
                Specific output: 94.3 bhp/litre
                Specific torque: 103.91 Nm/litre
                Performance
                0-100km/h: 4.5 s
                Top speed: 300 km/h
                Power to weight: 266.67 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Longitudinal
                Suspension front: I.DW.
                Suspension rear: I.DW.
                Wheels F/R: 8.5 x 20/10.0 x 20
                Tyres front: 245/40 R 20
                Tyres rear: 275/35 R 20
                Brakes: VeDi/VeDi-S
                Brake diametre: 380/330 mm
                Transmission: 6M
                Drive: RWD


                Alfa Romeo GT 1.9 16V Multijet 2003

                Bodywork
                Type: 2+2 FHC
                Number of doors: 2
                Dimensions
                Wheelbase: 2596 mm
                Track front: 1524 mm
                Track rear: 1510 mm
                Length: 4489 mm
                Width: 1763 mm
                Kerb weight: 1365 kg
                Fuel capacity: 63 l
                Engine
                Manufacturer: Alfa Romeo
                Type: S-4
                Wet sumped
                DOHC
                16 valves total
                4 valves per cylinder
                Bore x stroke: 82.00mm Ч 90.40mm
                Bore / stroke ratio: 0.91
                Displacement: 1910 cc 116.55 cu in
                Compression: 18.00:1
                Fuel system: Bo EDC 16 direct diesel inj.
                Aspiration: Turbo D.
                Intercooler: Y
                Catalytic Converter: Y
                Max. output: 149 PS (147.0 bhp) (109.6 kW)@4000 rpm
                Max. torque: 305.0 Nm (225 lbft) (31.1 kgm)@2000 rpm
                Coolant: Water
                Specific output: 77 bhp/litre
                Specific torque: 159.69 Nm/litre
                Performance
                0-100km/h: 9.6 s
                Kilometre: 30.90s
                Top speed: 209 km/h
                Fuel consumption: 8.7/5.4/6.7 l/100km urban/extra-urban/combined
                CO2 emissions: 178 g/km
                Power to weight: 107.69 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.TA.ARB.
                Suspension rear: I.MS.CS.ARB.
                Tyres front: 205/55 R 16
                Tyres rear: 205/55 R 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 284/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.61
                Final drive ratio: 3.56

                Alfa Romeo GT 2.0 JTS 2003

                Dimensions
                Wheelbase: 2596 mm
                Track front: 1524 mm
                Track rear: 1510 mm
                Length: 4489 mm
                Width: 1763 mm
                Kerb weight: 1320 kg
                Fuel capacity: 63 l
                Engine
                Manufacturer: Alfa Romeo
                Type: S-4
                Wet sumped
                DOHC
                16 valves total
                4 valves per cylinder
                Bore x stroke: 83.00mm Ч 91.00mm
                Bore / stroke ratio: 0.91
                Displacement: 1970 cc 120.21 cu in
                Compression: 11.30:1
                Fuel system: Bo Motronic MED7.1.1 fuel inj.
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 164.3 PS (162.0 bhp) (120.8 kW)@6400 rpm
                Max. torque: 206.0 Nm (152 lbft) (21 kgm)@3250 rpm
                Coolant: Water
                Specific output: 82.2 bhp/litre
                Specific torque: 104.57 Nm/litre
                Performance
                0-100km/h: 8.7 s
                Kilometre: 29.20s
                Top speed: 216 km/h
                Fuel consumption: 12.3/6.8/8.7 l/100km urban/extra-urban/combined
                CO2 emissions: 208 g/km
                Power to weight: 122.73 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.TA.ARB.
                Suspension rear: I.MS.CS.ARB.
                Tyres front: 205/55 R 16
                Tyres rear: 205/55 R 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 284/276 mm
                Transmission: 5M
                Drive: FWD
                Top gear ratio: 0.95
                Final drive ratio: 3.73

                Alfa Romeo GT 3.2 V6 24V 2003
                Dimensions
                Wheelbase: 2596 mm
                Track front: 1524 mm
                Track rear: 1510 mm
                Length: 4489 mm
                Width: 1763 mm
                Kerb weight: 1410 kg
                Fuel capacity: 63 l
                Engine
                Manufacturer: Alfa Romeo
                Type: V-6
                in 60° vee
                Wet sumped
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 93.00mm Ч 78.00mm
                Bore / stroke ratio: 1.19
                Displacement: 3179 cc 193.99 cu in
                Compression: 10.00:1
                Fuel system: Bo Motronic MED7.1.1 fuel inj.
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 239.3 PS (236.0 bhp) (176 kW)@6200 rpm
                Max. torque: 300.0 Nm (221 lbft) (30.6 kgm)@4800 rpm
                Coolant: Water
                Specific output: 74.2 bhp/litre
                Specific torque: 94.37 Nm/litre
                Performance
                0-100km/h: 6.7 s
                Kilometre: 26.00s
                Top speed: 243 km/h
                Fuel consumption: 18.6/8.7/12.4 l/100km urban/extra-urban/combined
                CO2 emissions: 295 g/km
                Power to weight: 167.38 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.TA.ARB.
                Suspension rear: I.MS.CS.ARB.
                Tyres front: 225/45 ZR 17
                Tyres rear: 225/45 ZR 17
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 330/276 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.82
                Final drive ratio: 3.73

                Alfa Romeo Spider 2.0 16V TS 2003

                Bodywork
                Type: 2S DHC
                Designer: Pininfarina
                Number of doors: 2
                Dimensions
                Wheelbase: 2540 mm
                Track front: 1506 mm
                Track rear: 1499 mm
                Length: 4299 mm
                Width: 1776 mm
                Kerb weight: 1405 kg
                Fuel capacity: 70 l
                Engine
                Manufacturer: Alfa-Romeo
                Type: S-4
                Wet sumped
                DOHC
                16 valves total
                4 valves per cylinder
                Bore x stroke: 83.00mm Ч 91.00mm
                Bore / stroke ratio: 0.91
                Displacement: 1970 cc 120.21 cu in
                Compression: 10.00:1
                Fuel system: Bo ME 7.3.1 fuel inj.
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 149 PS (147.0 bhp) (109.6 kW)@6300 rpm
                Max. torque: 181.0 Nm (133 lbft) (18.5 kgm)@3800 rpm
                Coolant: Water
                Specific output: 74.6 bhp/litre
                Specific torque: 91.88 Nm/litre
                Performance
                Kilometre: 29.90s
                Top speed: 210 km/h
                Fuel consumption: 13.3/6.8/9.2 l/100km urban/extra-urban/combined
                CO2 emissions: 220 g/km
                Power to weight: 104.63 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.MS.LW.ARB.
                Suspension rear: I.MultiLi.CS.ARB.
                Wheels F/R: 7J x 16/7J x 16
                Tyres front: 205/50 R 16 87Y
                Tyres rear: 205/50 R 16 87Y
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 284/240 mm
                Transmission: 5M
                Drive: FWD
                Top gear ratio: 0.95
                Final drive ratio: 3.56

                Alfa Romeo Spider 3.2 V6 24V 2003
                Bodywork
                Type: 2S DHC
                Designer: Pininfarina
                Number of doors: 2
                Dimensions
                Wheelbase: 2540 mm
                Track front: 1530 mm
                Track rear: 1508 mm
                Length: 4299 mm
                Width: 1776 mm
                Kerb weight: 1470 kg
                Fuel capacity: 70 l
                Engine
                Manufacturer: Alfa-Romeo
                Type: V-6
                in 60° vee
                Wet sumped
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 93.00mm Ч 78.00mm
                Bore / stroke ratio: 1.19
                Displacement: 3179 cc 193.99 cu in
                Compression: 10.50:1
                Fuel system: Bo ME 3.1 fuel inj.
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 239.3 PS (236.0 bhp) (176 kW)@6200 rpm
                Max. torque: 289.0 Nm (213 lbft) (29.5 kgm)@4800 rpm
                Coolant: Water
                Specific output: 74.2 bhp/litre
                Specific torque: 90.91 Nm/litre
                Performance
                Kilometre: 25.80s
                Top speed: 242 km/h
                Fuel consumption: 19.9/9.3/13.2 l/100km urban/extra-urban/combined
                CO2 emissions: 315 g/km
                Power to weight: 160.54 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.MS.LW.ARB.
                Suspension rear: I.MultiLi.CS.ARB.
                Wheels F/R: 7.5J x 17/7.5J x 17
                Tyres front: 225/45 ZR 17 91Y
                Tyres rear: 225/45 ZR 17 91Y
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 305/240 mm
                Transmission: 6M
                Drive: FWD
                Top gear ratio: 0.82
                Final drive ratio: 3.73

                Alfa Romeo Kamal 2003

                Bodywork
                Type: 4/5S ORV
                Number of doors: 5
                Dimensions
                Length: 4350 mm
                Width: 1860 mm
                Engine
                Manufacturer: Alfa Romeo
                Type: V-6
                in 60° vee
                DOHC
                24 valves total
                4 valves per cylinder
                Bore x stroke: 93.00mm Ч 78.00mm
                Bore / stroke ratio: 1.19
                Displacement: 3179 cc 193.99 cu in
                Compression: 10.50:1
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 249.4 PS (246.0 bhp) (183.4 kW)@6200 rpm
                Max. torque: 300.0 Nm (221 lbft) (30.6 kgm)@4800 rpm
                Coolant: Water
                Specific output: 77.4 bhp/litre
                Specific torque: 94.37 Nm/litre
                Chasis
                Engine location: Front
                Engine alignment: Unknown
                Suspension front: I.DW.
                Suspension rear: I.DW.
                Tyres front: Pirelli Scorpion 265/45 x 20
                Tyres rear: Pirelli Scorpion 265/45 x 20
                Transmission: 6A
                Drive: 4WD


                Alfa Romeo 147 2.0 16V TS 2004
                Dimensions
                Wheelbase: 2546 mm
                Track front: 1509 mm
                Track rear: 1494 mm
                Length: 4223 mm
                Width: 1729 mm
                Kerb weight: 1250 kg
                Fuel capacity: 60 l
                Engine
                Manufacturer: Alfa-Romeo
                Type: S-4
                Wet sumped
                DOHC
                16 valves total
                4 valves per cylinder
                Bore x stroke: 83.00mm Ч 91.00mm
                Bore / stroke ratio: 0.91
                Displacement: 1970 cc 120.21 cu in
                Compression: 10.00:1
                Fuel system: Bo Mo ME.7 fuel injection
                Aspiration: Normal
                Catalytic Converter: Y
                Max. output: 150.1 PS (148.0 bhp) (110.4 kW)@6300 rpm
                Max. torque: 181.0 Nm (133 lbft) (18.5 kgm)@3800 rpm
                Coolant: Water
                Specific output: 75.1 bhp/litre
                Specific torque: 91.88 Nm/litre
                Performance
                0-100km/h: 9.3 s
                Kilometre: 30.20s
                Top speed: 208 km/h
                Fuel consumption: 12.1/7.0/8.9 l/100km urban/extra-urban/combined
                CO2 emissions: 211 g/km
                Power to weight: 118.4 bhp/ton
                Chasis
                Engine location: Front
                Engine alignment: Transverse
                Steering: rack & pinion PAS
                Suspension front: I.DW.TA.ARB.
                Suspension rear: I.MS.ARB.
                Tyres front: 205/55 WR 16
                Tyres rear: 205/55 WR 16
                Brakes: VeDi/Di-S-ABS
                Brake diametre: 284/251 mm
                Transmission: 5M
                Drive: FWD
                Top gear ratio: 0.92
                Final drive ratio: 3.87
                www.facebook.com/workshox

                Comment


                • #9
                  GTA QV Q4 ti

                  Характеристики на по-редките спортни модели на марката Alfa Romeo:
                  QV ti GTA Q4

                  Alfa Romeo 75 1.8 Turbo Quadrifoglio 1986
                  Dimensions
                  Wheelbase: 2510 mm
                  Length: 4420 mm
                  Width: 1631 mm
                  Kerb weight: 1240 kg
                  Aerodynamics
                  Drag coefficient: 0.34
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: S-4
                  DOHC


                  Bore x stroke: 80.00mm Ч 88.50mm
                  Bore / stroke ratio: 0.9
                  Displacement: 1779 cc 108.56 cu in
                  Aspiration: Turbo
                  Catalytic Converter: N
                  Max. output: 167.3 PS (165.0 bhp) (123 kW)@5800 rpm
                  Max. torque:

                  Coolant: Water
                  Specific output: 92.7 bhp/litre
                  Performance
                  0-100km/h: 7.6 s
                  Top speed: 212 km/h
                  Power to weight: 133.06 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Longitudinal
                  Suspension front: I.DW.TB.ARB.
                  Suspension rear: dD.WL.CS.ARB.
                  Transmission: 5M
                  Drive: RWD

                  Alfa Romeo 75 V6 Quadrifoglio 1986

                  Dimensions
                  Wheelbase: 2510 mm
                  Track front: 1367 mm
                  Track rear: 1356 mm
                  Length: 4331 mm
                  Width: 1631 mm
                  Ground clearance: 120 mm
                  Kerb weight: 1160 kg
                  Fuel capacity: 68 l
                  Aerodynamics
                  Drag coefficient: 0.34
                  Frontal area: 1.91
                  Cx: 0.65
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: V-6
                  SOHC
                  12 valves total
                  2 valves per cylinder
                  Main bearings: 4
                  Bore x stroke: 88.00mm Ч 68.30mm
                  Bore / stroke ratio: 1.29
                  Displacement: 2492 cc 152.07 cu in
                  Compression: 9.00:1
                  Fuel system: Bo L-Jet fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: N
                  Max. output: 155.1 PS (153.0 bhp) (114.1 kW)@5600 rpm
                  Max. torque: 210.0 Nm (155 lbft) (21.4 kgm)@4000 rpm
                  Coolant: Water
                  Specific output: 61.4 bhp/litre
                  Specific torque: 84.27 Nm/litre
                  Performance
                  0-60mph: 8.9 s
                  Quarter mile: 16.70s
                  Top speed: 209 km/h
                  Power to weight: 131.9 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Longitudinal
                  Steering: rack & pinion
                  Turning circle: 10.90 m
                  Suspension front: I.DW.TB.ARB.
                  Suspension rear: dD.WL.CS.ARB.
                  Brakes: VeDi/Di-S
                  Transmission: 5M
                  Drive: RWD
                  Top gear ratio: 0.78
                  Final drive ratio: 4.1

                  Alfa Romeo Sprint Quadrifoglio 1988

                  Bodywork
                  Type: 2+2 FHC
                  Number of doors: 3
                  Dimensions
                  Wheelbase: 2456 mm
                  Length: 4021 mm
                  Width: 1621 mm
                  Kerb weight: 915 kg
                  Aerodynamics
                  Drag coefficient: 0.38
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: F-4
                  SOHC
                  8 valves total
                  2 valves per cylinder
                  Main bearings: 3
                  Bore x stroke: 87.00mm Ч 72.00mm
                  Bore / stroke ratio: 1.21
                  Displacement: 1712 cc 104.47 cu in
                  Compression: 9.50:1
                  Fuel system: 2 We carbs
                  Aspiration: Normal
                  Catalytic Converter: N
                  Max. output: 119.6 PS (118.0 bhp) (88 kW)@6000 rpm
                  Max. torque: 148.0 Nm (109 lbft) (15.1 kgm)@3500 rpm
                  Coolant: Water
                  Specific output: 68.9 bhp/litre
                  Specific torque: 86.45 Nm/litre
                  Performance
                  0-60mph: 9.1 s
                  Quarter mile: 17.60s
                  Top speed: 185 km/h
                  Power to weight: 128.96 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Longitudinal
                  Transmission: 5M
                  Drive: FWD

                  Alfa Romeo 164 Quadrifoglio 1990

                  Bodywork
                  Type: 4/5S SAL (7)
                  Designer: Pininfarina
                  Number of doors: 4
                  Dimensions
                  Wheelbase: 2659 mm
                  Length: 4554 mm
                  Width: 1760 mm
                  Kerb weight: 1429 kg
                  Weight distribution F/R: 58 %
                  Fuel capacity: 70 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: V-6
                  in 60° vee
                  SOHC
                  12 valves total
                  2 valves per cylinder
                  Main bearings: 4
                  Bore x stroke: 93.00mm Ч 72.60mm
                  Bore / stroke ratio: 1.28
                  Displacement: 2959 cc 180.56 cu in
                  Compression: 10.00:1
                  Fuel system: Bo Mot fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 202.8 PS (200.0 bhp) (149.1 kW)@5800 rpm
                  Max. torque: 264.0 Nm (195 lbft) (26.9 kgm)@4400 rpm
                  Coolant: Water
                  Specific output: 67.6 bhp/litre
                  Specific torque: 89.22 Nm/litre
                  Performance
                  0-100km/h: 7.7 s
                  Top speed: 237 km/h
                  Power to weight: 139.96 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Transmission: 5M
                  Drive: FWD
                  Top gear ratio: 0.92
                  Final drive ratio: 3.55

                  Alfa Romeo 33 1.7IE 16V Quadrifoglio 1990
                  Bodywork
                  Type: 4/5S SAL
                  Designer: Walter da Silva
                  Number of doors: 5
                  Dimensions
                  Wheelbase: 2475 mm
                  Track front: 1366 mm
                  Track rear: 1364 mm
                  Length: 4075 mm
                  Width: 1613 mm
                  Kerb weight: 1070 kg
                  Fuel capacity: 50 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: F-4
                  DOHC
                  16 valves total
                  4 valves per cylinder
                  Main bearings: 3
                  Bore x stroke: 87.00mm Ч 72.00mm
                  Bore / stroke ratio: 1.21
                  Displacement: 1712 cc 104.47 cu in
                  Compression: 10.00:1
                  Fuel system: Bo Mot ML4-1 fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 128.8 PS (127.0 bhp) (94.7 kW)@6500 rpm
                  Max. torque: 149.0 Nm (110 lbft) (15.2 kgm)@4600 rpm
                  Coolant: Water
                  Specific output: 74.2 bhp/litre
                  Specific torque: 87.03 Nm/litre
                  Performance
                  0-100km/h: 8.9 s
                  Kilometre: 31.80s
                  Top speed: 198 km/h
                  Fuel consumption: 6.0/8.0/10.0 l/100km 90km/h / 120km/h / urban
                  Power to weight: 118.69 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Longitudinal
                  Steering: rack & pinion PAS
                  Turning circle: 11.00 m
                  Suspension front: I.MS.LW.CS.ARB.
                  Suspension rear: dD.W.PR.CS.
                  Wheels F/R: 5.5J x 14/5.5J x 14
                  Tyres front: 185/60 HR 14
                  Tyres rear: 185/60 HR 14
                  Brakes: VeDi/Dr
                  Transmission: 5M
                  Drive: AWD
                  Top gear ratio: 0.85
                  Final drive ratio: 3.89

                  Alfa Romeo 155 Q4 1992

                  Bodywork
                  Type: 4/5S SAL
                  Number of doors: 4
                  Dimensions
                  Wheelbase: 2540 mm
                  Track front: 1477 mm
                  Track rear: 1402 mm
                  Length: 4445 mm
                  Width: 1700 mm
                  Kerb weight: 1390 kg
                  Fuel capacity: 60 l
                  Engine
                  Manufacturer: Fiat
                  Type: S-4
                  DOHC
                  16 valves total
                  4 valves per cylinder
                  Main bearings: 5
                  Bore x stroke: 84.00mm Ч 90.00mm
                  Bore / stroke ratio: 0.93
                  Displacement: 1995 cc 121.74 cu in
                  Compression: 8.00:1
                  Fuel system: Marelli IAW fuel inj.
                  Aspiration: Turbo
                  Compressor type: Garrett T3 turbo
                  Intercooler: Air/Air
                  Catalytic Converter: Y
                  Max. output: 189.6 PS (187.0 bhp) (139.4 kW)@6000 rpm
                  Max. torque: 291.0 Nm (215 lbft) (29.7 kgm)@2500 rpm
                  Coolant: Water
                  Specific output: 93.7 bhp/litre
                  Specific torque: 145.86 Nm/litre
                  Performance
                  0-100km/h: 7 s
                  Kilometre: 28.30s
                  Top speed: 225 km/h
                  Power to weight: 134.53 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Steering: rack & pinion PAS
                  Turning circle: 10.70 m
                  Suspension front: I.MS.W.CS.ARB.
                  Suspension rear: LA.TA.CS.ARB.
                  Brakes: VeDi/Di-ABS
                  Transmission: 5M
                  Drive: AWD
                  Top gear ratio: 0.92
                  Final drive ratio: 3.35

                  Alfa Romeo 164 Quadrifoglio 1993
                  Bodywork
                  Type: 4/5S SAL (7)
                  Designer: Pininfarina
                  Number of doors: 4
                  Dimensions
                  Wheelbase: 2659 mm
                  Track front: 1515 mm
                  Track rear: 1488 mm
                  Length: 4554 mm
                  Width: 1760 mm
                  Kerb weight: 1510 kg
                  Fuel capacity: 70 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: V-6
                  in 60° vee
                  DOHC
                  24 valves total
                  4 valves per cylinder
                  Main bearings: 4
                  Bore x stroke: 93.00mm Ч 72.60mm
                  Bore / stroke ratio: 1.28
                  Displacement: 2959 cc 180.56 cu in
                  Compression: 10.00:1
                  Fuel system: Bo Motronic M 1.7 fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 231.2 PS (228.0 bhp) (170 kW)@6300 rpm
                  Max. torque: 280.0 Nm (207 lbft) (28.6 kgm)@5000 rpm
                  Coolant: Water
                  Specific output: 77.1 bhp/litre
                  Specific torque: 94.63 Nm/litre
                  Performance
                  0-100km/h: 7.7 s
                  Kilometre: 27.80s
                  Top speed: 245 km/h
                  Power to weight: 150.99 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Transmission: 5M
                  Drive: FWD
                  Top gear ratio: 0.92
                  Final drive ratio: 3.41

                  Alfa Romeo 146 ti 1995
                  Dimensions
                  Wheelbase: 2540 mm
                  Length: 4257 mm
                  Width: 1712 mm
                  Kerb weight: 1225 kg
                  Fuel capacity: 50.9 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: S-4
                  DOHC
                  16 valves total
                  4 valves per cylinder
                  Bore x stroke: 83.00mm Ч 91.00mm
                  Bore / stroke ratio: 0.91
                  Displacement: 1970 cc 120.21 cu in
                  Compression: 10.00:1
                  Fuel system: Bo Motronic fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 152.1 PS (150.0 bhp) (111.9 kW)@6200 rpm
                  Max. torque: 187.0 Nm (138 lbft) (19.1 kgm)@4000 rpm
                  Coolant: Water
                  Specific output: 76.1 bhp/litre
                  Specific torque: 94.92 Nm/litre
                  Performance
                  0-60mph: 8.5 s
                  Top speed: 209 km/h
                  Power to weight: 122.45 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Steering: rack & pinion PAS
                  Turns lock-to-lock: 2.100
                  Suspension front: I.MS.LW.CS.ARB.
                  Suspension rear: I.TA.CS.ARB.
                  Brakes: VeDi/Di-S-ABS
                  Transmission: 5M
                  Drive: FWD

                  Alfa Romeo 145 Quadrifoglio 1995

                  Dimensions
                  Wheelbase: 2540 mm
                  Track front: 1472 mm
                  Track rear: 1428 mm
                  Length: 4061 mm
                  Width: 1712 mm
                  Kerb weight: 1240 kg
                  Fuel capacity: 61 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: S-4
                  DOHC
                  16 valves total
                  4 valves per cylinder
                  Bore x stroke: 83.00mm Ч 91.00mm
                  Bore / stroke ratio: 0.91
                  Displacement: 1970 cc 120.21 cu in
                  Compression: 10.00:1
                  Fuel system: Bo Motronic fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 152.1 PS (150.0 bhp) (111.9 kW)@6200 rpm
                  Max. torque: 187.0 Nm (138 lbft) (19.1 kgm)@4000 rpm
                  Coolant: Water
                  Specific output: 76.1 bhp/litre
                  Specific torque: 94.92 Nm/litre
                  Performance
                  0-60mph: 8.3 s
                  0-100mph: 23.2 s
                  Top speed: 208 km/h
                  Power to weight: 120.97 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Steering: rack & pinion PAS
                  Turns lock-to-lock: 2.100
                  Suspension front: I.MS.LW.CS.ARB.
                  Suspension rear: I.TA.CS.ARB.
                  Brakes: VeDi/Di-S-ABS
                  Transmission: 5M
                  Drive: FWD
                  Top gear ratio: 0.85
                  Final drive ratio: 3.56

                  Alfa Romeo 145 Quadrifoglio 1999
                  Dimensions
                  Wheelbase: 2540 mm
                  Track front: 1472 mm
                  Track rear: 1441 mm
                  Length: 4061 mm
                  Width: 1712 mm
                  Kerb weight: 1240 kg
                  Fuel capacity: 61 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: S-4
                  Wet sumped
                  DOHC
                  16 valves total
                  4 valves per cylinder
                  Bore x stroke: 83.00mm Ч 91.05mm
                  Bore / stroke ratio: 0.91
                  Displacement: 1970 cc 120.21 cu in
                  Compression: 10.00:1
                  Fuel system: Bo Motronic M 1.5.5 fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 155.1 PS (153.0 bhp) (114.1 kW)@6400 rpm
                  Max. torque: 187.0 Nm (138 lbft) (19.1 kgm)@3500 rpm
                  Coolant: Water
                  Specific output: 77.7 bhp/litre
                  Specific torque: 94.92 Nm/litre
                  Performance
                  0-100km/h: 8.2 s
                  Kilometre: 29.40s
                  Top speed: 211 km/h
                  Fuel consumption: 12.4/6.6/8.7 l/100km urban/out of town/combined
                  Power to weight: 123.39 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Steering: rack & pinion PAS
                  Turning circle: 11.00 m
                  Suspension front: I.MS.LW.CS.ARB.
                  Suspension rear: I.TA.CS.ARB.
                  Tyres front: 195/55 VR 15
                  Tyres rear: 195/55 VR 15
                  Brakes: VeDi/Di-S
                  Brake diametre: 257/240 mm
                  Transmission: 5M
                  Drive: FWD

                  Alfa Romeo 146 ti 1999

                  Bodywork
                  Type: 4/5S SAL
                  Number of doors: 5
                  Dimensions
                  Wheelbase: 2540 mm
                  Track front: 1472 mm
                  Track rear: 1441 mm
                  Length: 4235 mm
                  Width: 1712 mm
                  Kerb weight: 1275 kg
                  Fuel capacity: 61 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: S-4
                  Wet sumped
                  DOHC
                  16 valves total
                  4 valves per cylinder
                  Bore x stroke: 83.00mm Ч 91.05mm
                  Bore / stroke ratio: 0.91
                  Displacement: 1970 cc 120.21 cu in
                  Compression: 10.00:1
                  Fuel system: Bo Motronic M 1.5.5 fuel inj.
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 155.1 PS (153.0 bhp) (114.1 kW)@6400 rpm
                  Max. torque: 187.0 Nm (138 lbft) (19.1 kgm)@3500 rpm
                  Coolant: Water
                  Specific output: 77.7 bhp/litre
                  Specific torque: 94.92 Nm/litre
                  Performance
                  0-100km/h: 8.4 s
                  Kilometre: 29.40s
                  Top speed: 216 km/h
                  Fuel consumption: 12.4/6.6/8.7 l/100km urban/combined/mixed
                  Power to weight: 120 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Steering: rack & pinion PAS
                  Turning circle: 11.00 m
                  Suspension front: I.MS.LW.CS.ARB.
                  Suspension rear: I.TA.CS.ARB.
                  Tyres front: 195/55 VR 15
                  Tyres rear: 195/55 VR 15
                  Brakes: VeDi/Di-S
                  Brake diametre: 257/240 mm
                  Transmission: 5M
                  Drive: FWD

                  Alfa Romeo 147 GTA 2002

                  Dimensions
                  Wheelbase: 2546 mm
                  Track front: 1516 mm
                  Track rear: 1504 mm
                  Length: 4213 mm
                  Width: 1764 mm
                  Kerb weight: 1360 kg
                  Fuel capacity: 63 l
                  Engine
                  Manufacturer: Alfa Romeo
                  Type: V-6
                  in 60° vee
                  DOHC
                  24 valves total
                  4 valves per cylinder
                  Bore x stroke: 93.00mm Ч 78.00mm
                  Bore / stroke ratio: 1.19
                  Displacement: 3179 cc 193.99 cu in
                  Compression: 10.50:1
                  Fuel system: Bo Mo ME 7.3.1 electronic MPFi
                  Aspiration: Normal
                  Catalytic Converter: Y
                  Max. output: 249.4 PS (246.0 bhp) (183.4 kW)@6200 rpm
                  Max. torque: 300.0 Nm (221 lbft) (30.6 kgm)@4800 rpm
                  Coolant: Water
                  Specific output: 77.4 bhp/litre
                  Specific torque: 94.37 Nm/litre
                  Performance
                  0-60mph: 6.1 s
                  0-100km/h: 6.3 s
                  0-100mph: 15 s
                  Quarter mile: 14.60s @ 99.00 mph
                  Kilometre: 26.40s @ 201.00 km/h
                  Top speed: 235 km/h
                  Fuel consumption: 18.1/8.6/12.1 l/100km urban/extra-urban/combined
                  CO2 emissions: 287 g/km
                  Power to weight: 180.88 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Steering: rack & pinion PAS
                  Turning circle: 12.10 m
                  Suspension front: I.DW.TA.ARB.
                  Suspension rear: I.MS.CS.ARB.
                  Tyres front: 225/45 ZR 17
                  Tyres rear: 225/45 ZR 17
                  Brakes: VeDi/Di-S-ABS
                  Brake diametre: 305/276 mm
                  Transmission: 6M
                  Drive: FWD
                  Top gear ratio: 0.82
                  Final drive ratio: 3.73

                  Alfa Romeo 156 GTA 2002

                  Dimensions
                  Wheelbase: 2595 mm
                  Track front: 1522 mm
                  Track rear: 1509 mm
                  Length: 4430 mm
                  Width: 1765 mm
                  Kerb weight: 1410 kg
                  Weight distribution F/R: 64.5 %
                  Fuel capacity: 63 l
                  Engine Manufacturer: Alfa Romeo
                  Type: V-6
                  in 60° vee
                  DOHC
                  24 valves total
                  4 valves per cylinder
                  Main bearings: 4
                  Bore x stroke: 93.00mm Ч 78.00mm
                  Bore / stroke ratio: 1.19
                  Displacement: 3179 cc 193.99 cu in
                  Compression: 10.50:1
                  Fuel system: Bo Motronic ME7.3.1
                  Aspiration: Normal Catalytic
                  Converter: Y
                  Max. output: 249.4 PS (246.0 bhp) (183.4 kW)@6200 rpm
                  Max. torque: 300.0 Nm (221 lbft) (30.6 kgm)@4800 rpm
                  Coolant: Water
                  Specific output: 77.4 bhp/litre
                  Specific torque: 94.37 Nm/litre
                  Performance
                  0-60mph: 6.5 s
                  0-100mph: 15.1 s
                  Quarter mile: 14.70s @ 98.00 mph
                  Kilometre: 26.50s @ 204.00 km/h
                  Top speed: 241 km/h
                  CO2 emissions: 287 g/km
                  Power to weight: 174.47 bhp/ton
                  Chasis
                  Engine location: Front
                  Engine alignment: Transverse
                  Steering: rack & pinion PAS
                  Turns lock-to-lock: 1.750
                  Turning circle: 12.10 m
                  Suspension front: I.DW.ARB.
                  Suspension rear: I.MS.ARB.
                  Wheels F/R: 7.5J x 17/7.5J x 17
                  Tyres front: 225/45 ZR 17
                  Tyres rear: 225/45 ZR 17
                  Brakes: VeDi/Di-S-ABS
                  Brake diametre: 305/276 mm
                  Transmission: 6M
                  Drive: FWD
                  Top gear ratio: 0.82
                  Final drive ratio: 3.73
                  www.facebook.com/workshox

                  Comment


                  • #10
                    Ще помоля всеки, който открие грешки и/или несъотствия с данните описани тук и тези описани в ръководството на автомобила да пише ЛС на мен или на някой Администратор, за да може да се извърши корекция. Сигурен съм, че има доста грешки, но с времето се надявам да ги намалим до минимален брой.
                    Също така бих помолил колегите да не пишат в тази тема, за да може тя да остане само като Info и ако има заявки за други модели, който не са описани до този момент да ми пишат ЛС.
                    Пожелавам на всички собственици на марката Alfa Romeo да имат винаги по-добри постижения, от тези, които са описани в ръководствата за автомобилите им.
                    www.facebook.com/workshox

                    Comment

                    Working...
                    X