Известие

**Special Transmission** · d.m.y г., 20:04

Bought knuckles for Alfa Romeo 155 2.5V6 and shock absorbers Fiat Marea.

Attached Files

**nicola 59** · d.m.y г., 22:03

Колега пиши си на руски ,махни ги тези неграмотните англофили.

**Special Transmission** · d.m.y г., 22:34

Made a spacer under the oil filter. Fence on the turbine oil from the main oil gallery. I think the oil pressure is higher, the turbine will be better)))

Attached Files

**stelt** · d.m.y г., 23:04

Don't You thing that the oil filter is near to the exhausted tubes ?

**Special Transmission** · d.m.y г., 23:08

Първоначално публикувано от stelt Покажи съобщение

Don't You thing that the oil filter is near to the exhausted tubes ?

small optical illusion))) from the filter to the exhaust manifold - about 12 centimeters. I think it is not critical, later made thermal screen.

PS: I'm more concerned located close to the exhaust starter))) but for him to do thermal screen

**Special Transmission** · d.m.y г., 20:11

Put forged wheels. Like appearance?

Attached Files

**_power_** · d.m.y г., 01:07

The car is in very high standing position ... is it jacked up ?

**Special Transmission** · d.m.y г., 08:46

Yes, the car in a high position. I think it's because of the Fiat Marea 2.0 racks. There's a heavy engine, and therefore higher and stiffer springs. I have the same engine much easier, hence the result))) For the first time enough)))

**_power_** · d.m.y г., 18:33

If the car is done for drag, you better stick to stiffer and longer springs at the back, but the front ones are usually short and stiff.

**Special Transmission** · d.m.y г., 19:09

hi there! Faced with the problem that in the engine compartment to fit downpipe. I think to solve this problem by setting the hot turbine housing from the Alfa Romeo 164 turbobenzin B6. It is very compact and small. I think it is much setting free the space under the hood. A / P far as is known to me - 0.41; 6 centimeters. I think it will speed up the spool.